AUTEC Tallin 7,5x17/5x114,3 ET40 DIA70

These wheel nuts from Grayston are specifically designed to fit classic Wolfrace slot mag wheels which require a sleeve fitting with a tapered washer.Available in different thread options:Option 1: 1/ more→2" UNF thread with 11/16" (17.4mm) OD sleeveOption 2: M12 x 1.5 thread with 41/64" (16.3mm) OD sleeveOption 3: 7/16" UNF thread with 11/16" (17.4mm) OD sleeveOption 4: 3/8" UNF thread with 41/64" (16.3mm) OD sleeveOption 5: M12 x 1.25 thread with 41/64" (16.3mm) OD sleeveOption 6: M12 x 1.5 thread with 11/16" (17.4mm) OD sleeveOption 7: 7/16" UNF thread with 41/64" (16.3mm) OD sleeveOption 8: M14 x 1.5 thread with 11/116" (17.4mm) OD Sleeve

LMA wheel studs are for converting hubs that usually use wheel bolts to attach a wheel. Once fitted the wheel stud protrudes from the hub so you can fit the wheel quicker and easier, the wheel being h more→eld in place with wheel nuts. Available in a choice of lengths and several thread diameters and pitches to suit most applications.The stud has a stop to prevent the stud being wound in too farAllen key hex to allow easy tightening without gripping the stud and causing thread damageThe hub side has a taper on the end of the thread to make cross threading very unlikely10.9 Carbon steel construction, Ideal for Motorsport use, and other demanding applications

LMA wheel studs are for converting hubs that usually use wheel bolts to attach a wheel. Once fitted the wheel stud protrudes from the hub so you can fit the wheel quicker and easier, the wheel being h more→eld in place with wheel nuts. Available in a choice of lengths and several thread diameters and pitches to suit most applications.The stud has a stop to prevent the stud being wound in too farAllen key hex to allow easy tightening without gripping the stud and causing thread damageThe hub side has a taper on the end of the thread to make cross threading very unlikely10.9 Carbon steel construction, Ideal for Motorsport use, and other demanding applications