Avangard UShM-125/910
Cutting Discs222
 |
• Value plus blade suitable for cutting hard and medium materials including concrete, brick and stone.Value plus blade suitable for cutting hard and medium materials including concrete, brick and ston more→e.Technical Specification:B
 |
The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, which copes with de more→manding applications while delivering good results. Moreover, the disc's precision-manuf
 |
Up to 3x more precise than a standard ceramic diamond discThe tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore crucia more→l yet difficult. The Expert HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics.Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut.The Bosch Expert …
 |
The X-LOCK Expert for Inox and Metal Cutting Disc delivers powerful cutting performance in Inox and metal with maximum safety. The disc is made of premium aluminium oxide with functional fillers and a more→dditives to reduce heat generated while cutting. This produces good quality surface results and assures a long disc-performanc
 |
Cuts materials that angle grinders previously couldn’tProfess
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 125mm • Thickness: 1.2mm • Bore: 22.23mmContents
 |
Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. more→Specifications • Diameter: 125mm • Bore: 22.23mm • Ring: 20mm • Pack Quantity: 1
Wire & Cup Brushes204
 |
Price from £6.05 up to £7.49
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Inox Steel Wire Brush 50mm 6mm Shank 2608622117
The Wire Cup Brush provides a good fine surface finish. It is fitted with crimped wire for light-to-medium
 |
Price from £6.95 up to £7.95
Compare prices3→Compare prices and buy Faithfull Brass Wire Wheel Brush 75mm 6mm Shank WBS75CB
The Faithfull crimped brass wire circular brush designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and are des more→igned to operate with power tools up to a maximum of 4,500/min. Type: Circular Diameter: 75 mm Shaft: 6 mm (1/4in) Wire: 0.30 mm crimped brass wire Conforms to ISO 9001 and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £8.49 up to £8.95
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush Pointed End 12mm 6mm Shank LES451162
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mm.Wire Height: 20mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £6.05 up to £6.49
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (3 Piece)
• Set includes a 25mm wire end brush, 50mm wire cup brush, and a 50mm wire wheel brush • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces • Harde more→ned dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance to oxidation. …
 |
Price from £3.22 up to £5.32
Compare prices6→Compare prices and buy Draper Rotary Wire Brush, 6 x 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £30.95 up to £39.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 29mm 6mm Shank 456278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 29mm.Wire: 0.35 Steel.Additiona
 |
Price from £4.49 up to £5.77
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Ø100mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB100Technical Specification:D
 |
Price from £6.95 up to £7.76
Compare prices5→Compare prices and buy Sealey Twist Knot Wire Flat Brush Ø75mm with Ø6mm Shaft
• Twist knot flat wire wheel.• Stainless steel.• Shaft: ø6mm. • Width: ø75mm.• Max Speed: 12000rpm.Twist knot flat wire wheel, ø75mm width and a ø6mm shaft.• Twist knot flat wire w more→heel. • Stainless Steel. • Shaft: ø6mm. • Width: ø75mm. • Max Speed: 12000rpm. • Model No. TKFBS75Technica
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
