AWTools CS250 (AW80031)

Designed for fast and efficient rip cuts, the Festool SC38-91 L-39E Chainsaw Chain is optimized for use with the Festool UNIVERS SSU 200 Sword Saw. Engineered with a special tooth shape, this chain en more→sures high-speed cutting along the grain, delivering smooth and precise results with minimal effort. Built for professional woodworkers and construction specialists, this chain enhances cutting performance, accuracy, and efficiency, making it an essential accessory for timber processing, framing, and structural applications. Features and Benefits • Simple tool-free assembly in the sword saw • Chain tension can be adjusted without using tools • Can be resharpened multiple times with …

The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models.The ALM Manufacturing Chainsaw Chain has a 3/8in low profile (L/P) 0.043in guide bar slot 0.375mm an more→d low profile (L/P) 1.1mm guide bar slot. Made to fit: Bosch: AKE30 AKE30-17S PKE30B and suits saws with a 30cm (12in) bar and chain with 45 drive links.PTDALMBC045

The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models.The ALMBC052 Chainsaw Chain has a 3/8 inch Low profile (L/P) 0.043in guide bar slot 0.375 mm and Low more→profile (L/P) 1.1 mm guide bar slot. This chain is made to suit saws with a 35cm (14in) bar and chain with 52 drive links including: Makita:DCS34 UC3520AStihl: 009 017 018 019 023L E14 E140Solo: 636Poulan: ES300McCulloch: 1436Dolmar: ES36Bosch: AKE35 AKE35S AKE35-17S AKE35-18S AKE35-19S AKE35SDS SDS35 1800W Compares to F016800257 F016800015 164730001PTDALMBC052

MICRO-LITE narrow kerf chain used in combination with MICRO-LITE bars requires less power from the saw than standard cutting systems Feautres:- Low-vibration, low-kickback chamfer-chisel cutters have more→an angular shape with twin cutting corners that offer outstanding performance along with durability and easy, forgiving maintenance comparable to round-cornered chains- Narrow 0.043 (1.1mm) gauge reduces the weight of the MICRO-LITE bar and chain combination by approximately 15%- Lubrilink tie straps help keep oil where it is needed-on the chain - Top plate witness mark makes accurate sharpening easier- Lubriwell oil holes in all drive links help carry oil around the full length of the guide bar’s gr…

3/8" 1.3mm (.050") 56 Drive Link Chainsaw Chain

Oregon Micro-Lite 90SG is a 3/8" low profile saw chain with narrower drive links especially designed to fit on small consumer saws equipped with narrow gauge 1.1 mm (0.043") guide barsRecommended for more→electric saws and petrol saws up to 35cc and guide bars up to 16" (40cm ) on electric saws and up to 14" (35cm ) on petrol powered sawsFeatures:- Chamfer-chisel cutter design providing improved performance and a better stay sharp- Incorporates the OREGON Vibe-Ban low vibration feature, LubriLink and LubriWell lubrication features for enhanced service life- Witness marks on the cutter top plates assist in chain sharpeningSpecifications: Depth Gauge 0.025 File Size 4.5mm Gauge 0.043 …

The Bosch EXPERT Wood Cutting Cordless Mitre Saw Blade in 250mm diameter with a 24-tooth configuration and 30mm bore offers a versatile mid-size option for cordless mitre and sliding mitre saws. The 2 more→4-tooth count is ideal for fast, productive cross-cuts through softwood, hardwood, and engineered timber, where cutting speed and efficiency are the priority. Built to extend battery runtime, the blade's extra-thin kerf — up to 30% thinner than standard Expert blades — reduces friction and power consumption, delivering more cuts per charge without compromising on cut quality. MicroteQ carbide teeth, produced from extra-fine carbide grains manufactured in Bosch's own facilities, provide exceptional dura…

The DEWALT Series 60 Extreme Circular Saw Blade with laser cut expansion slots that help to reduce vibration and noise. The extra large sub micro grain carbide teeth remain sharper for much longer and more→can be resharpened up to 20 times. This stationary circular saw blade range can be used for cutting in natural wood plywood laminates particleboard and MDF. Ideal for both table and mitre saws.The DEWALT DT4351 Series 60 Circular Saw Blade for smooth cross-cuts in plywood softwood and all hardwoods. The alternate top bevel and triple chip grind geometry with tuned grinding angles give a good surface finish. It has the following specification: Finish: Extra Fine.Blade Diameter: 250mm.Bore Size: …

Makita SPECIALIZED Circular Saw Blade for Aluminium Cutting. These blades have excellent cutting performance in aluminium, copper, brass, bronze, and other non-ferrous metals. The blades are also suit more→able for working on plastics and laminated wood. The T.C.T technology enables the blade to maintain sharpness, providing reliable and accurate cuts over extended periods of use. Features & Benefits • Precision plate tensioning for a flatter blade and truer cuts • Excellent cut quantity in non-ferrous materials Specifications • Bore: 30mm • Diameter: 250mm • Tooth Count: 100 • Material Type: Aluminium • Machine Type: Portable Saw

The Bosch EXPERT Fibre Cement Cutting Saw Blade in 250mm diameter with a 6-tooth configuration and 30mm bore is designed for use with mitre saws, providing a larger blade diameter well suited to makin more→g precise, repeatable cuts across wider fibre cement panels and boards. Fibre cement demands a blade that can cope with its highly abrasive composition without losing accuracy or performance. This blade employs Bosch Diamond Technology, arming each PCD (polycrystalline diamond) tooth with a cutting edge capable of handling even the most abrasive materials time and again. Cuts are clean and precise, with no rough edges and less dust generated during the process. A protective coating is applied …

250 x 30mm Aluminium Cutting TCT Saw Blade - 80 TPU - 30mm Bore Circular Blade Overview: For mitre/radial arm crosscutting of wood, aluminium and...

HSS saw blades - steam treated for cutting all types of ferrous & non-ferrous metals. Generally the Steam Treated blades are used on hand operated machines cutting mild steel. Specifications • Di more→ameter: 250mm • Bore: 32mm • Thickness: 1.6mm • Teeth: 240 Teeth