Bort BWS-500-P (98299946)
Cutting Discs400
 |
High performance bonded discs for general metal cutting work on stainless steel, ferrous and non ferrous metals. Suitable for use with corded or cordless machines. Specifications • Partcode: DT43 more→921 • Type: Thin Cutting Disc for INOX • Diameter: 115mm • Thickness: 1.2mm • Bore: 22.3mm Contents • 10 Discs • Storage Tin
 |
The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore crucial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc more→uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics.The Bosch EXPERT HardCeramic X-LOCK Diamond Tile Cutting Disc offers the best cut in hard tiles. You can be confident of achieving a professional finish on every job with this diamond cutting disc.Features:- High Precision Cutting Hard Tiles- Clean, high quality cutting with Bosch Diamond Technology.- Chip-free cut with purpose-designe
 |
• Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• More durable than normal sanding discs.• Abrasive flaps are attached to rigid disc wit more→h epoxy adhesive - does not require backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø115/22mm.
 |
These Blue Spot Sanding Flap Discs are suitable for efficient stripping and sanding of metal and wood surfaces. They are ideal for finishing. This 3 piece set includes the following:40 Grit, 60 Grit a more→nd 120 Grit. Each sanding flap disc has the following specifications:
 |
Lasts up to 50x longer than a Bi-Metal blade in tough materials - Cutting thin sheet metal and thin wall pipes is a tough job, but with a good recip saw blade you can manage: the real problems start w more→hen you cut stainless steel. This tough, high-alloy steel is an obstacle to construction or renovation workers and destroys blades. Bosch Carbide Technology consigns these problems to the past. The EXPERT ‘Thin Tough Metal’ is a leap forward in recip saw blade development, where the hardest metal is integrated into a tooth design optimised for steel sheets and pipes. The teeth are ground to a fine geometry that allows even thin sheets of stainless steel to be cut smoothly. Ideal for metal workers, plu…
 |
For General Construction Materials - The Eco for Universal Segmented Diamond Disc is the preferred choice for reliable cuts in general construction materials. Its sintered cutting segments deliver goo more→d performance in a variety of materials including concrete, brick, limestone and roofing tile. The diamond disc is suitable for use with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • For Reliable Cuts in General Construction Materials • Eco for Universal Segmented Diamond Disc is the preferred choice for reliable cuts in general construction materials • Sintered cutting segments for good performance in a variety of materials …
 |
Reliable Cuts - The Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-qu more→ality standards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting building materials such as concrete and masonry. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Universal Building Materials • Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials • Optimised …
 |
The Bosch 2608900532 X-LOCK Expert Diamond Metal Wheel Cutting Disc lasts up to 100x longer than Bosch 2608603169 Cutting DiscThe Bosch 2608900532 has an exceptionally durable cutting edge using Bosch more→Diamond Technology. Cutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical smell of bonded discs burning away while they cut. With the EXPERT Diamond Metal Wheel, this smell can be consigned to the past - as can regular trips to a shop to buy new metal discs. For tradespeople and construction workers who are fed up with burning through bonded discs and money, the Bosch EXPERT Diamond Metal Wheel X-LOCK Diamond …
Wire & Cup Brushes213
 |
Price from £3.49 up to £4.01
Compare prices4→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 50mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø50mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 50mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Width: ø50mm. • Maximum Speed: 4500rpm. • Model No. SFBS50Technical Specification:D
 |
Price from £5.49
Compare prices4→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Wheel Brush 75mm 6mm Shank 2608622007
Fine Finish on Steel - The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealin more→g colour on welded seams. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. It is intended for use with drills with 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother …
 |
Price from £6.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Cup Brush 75mm 6mm Shank STA36040
Designed for use with electric drills, this Stanley crimped wire brush is ideal for removing light rust and for general surface preparation tasks on metal. Features & Benefits • Crimped steel wir more→es • Less aggressive than twist knot brushes • Suitable for various metal preparation tasks • Designed for use in a standard electric drill Specifications • Diameter: 75mm • Pack Quantity: 1
 |
Price from £2.49
Compare prices2→Compare prices and buy Faithfull Flat End Crimped Wire Brush 12mm 6mm Shank WBSI12
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12 Wire End Brush has the following specifications: Type: Flat End. Face diameter: 12 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel.Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £3.21 up to £4.76
Compare prices6→Compare prices and buy Draper Hollow Cup Wire Brush, 50mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £13.95
Compare prices3→Compare prices and buy Lessmann Crimped Wire Wheel Brush 70mm 6mm Shank 417163
The Lessmann Wheel Brushes are fitted with a 6mm shank. The tight filling wire and powerful running makes these brushes excellent tools. These encapsulated brushes have a long service life due to the more→bedding of wire in plastic, which also prevents end breakage. The brushes have a consistent working width.The Lessmann Knotted Wheel Brush With Shank has the following specification: Wire Type: SteelDiameter: 70mmWidth: 13mmShank: 6mmWire Gauge: 0.30Max Speed: 15,000/rpmAddit
 |
Price from £3.49 up to £4.18
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Ø75mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB75Technical Specification:D
 |
Price from £21.95
Compare prices3→Compare prices and buy Lessmann 0.3 Steel Wire Cup Brush 70mm 6mm Shank LES437162
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diame
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
