Bosch GOF 130 Professional 06016B7000
Diamond Core Bits & Milling Cutters583
 |
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull rout more→er cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/2in ShankCutting Diameter: 12.7 mm 1/2in. Cutting Length: 50 mm. Shank Diameter: 1/2in.Additiona
 |
This Sirius 4 piece Kitchen Fitters router bit set includes the essential router cutters needed when jointing kitchen worktops. These professional quality 1/2" and 1/4" shank cutters come in a foam pa more→dded aluminium case with plastic bumpers and a durable latch to keep them securely packed away during transport. Features and Benefits • Accessory set for jointing kitchen worktops • Includes 1/4" flush trimming bit and three 1/2" shank straight cutting bits • Packaged in a robust transport case with foam padding Contents • 1/4" Shank Flush Trimming Bit 25.4 x 12.7mm • 1/2" Shank Straight Bit 50 x 12.7mm (x2) • 1/2" Shank Straight Bit 63 x 12.7mm • Aluminium …
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/2 • Dia Metric: 4 more→.7 • Dia Imperial: 3/16 • Cut Length Metric: 11 • Overall Length Metric: 56
 |
Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eig more→ht Flutes BS 122/4. Specifications • Milling Diameter: 9.5mm • Shank Diameter: 10mm • Length of Cut: 21mm • Overall Length: 66.5mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
High quality 3-flute countersink bit for deburring, chamfering and countersinking. A finely-tuned material elasticity provides for great durability. Perfect chip removal and a low tilt risk ensure ple more→asant working. Cutting section as per DIN 335-C, 90° with 3 cutters. ¼" hexagon, suitable for holders with take-up as per DIN ISO 1173-D 6.3. Features and Benefits • Hex shaft for very good power transfer • Finely-tuned material elasticity for great durability • Very good centring properties • Perfect chip removal • Precise return movement Contents 846 3-flute Countersink Bit, 8.30 x 31 mm
 |
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications • Shank Diameter: 1/4 more→• Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 6.3 • Cut Length Imperial: 1/4 • Overall Length Metric: 46.5 • Radius 1 Metric: 4.8 • Radius 1 Imperial: 3/16
 |
These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS more→cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications. Suitable for general grooving and rebating. Specifications • D=1/4 inch • D=6.3 mm • C=16 mm • OL=48 mm • Shank Diameter=1/4 inch
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
