Bosch GWS 11-125 CIH Professional 0601830122
Cutting Discs235
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 125 mm • Thickness: 1.3 mm • Bore Size: 22.23 mm Features and Benefits • Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in …
 |
Powerful Cutting Performance - The X-LOCK Expert for Inox and Metal Cutting Disc delivers powerful cutting performance in Inox and metal with maximum safety. The disc is made of premium aluminium oxid more→e with functional fillers and additives to reduce heat generated while cutting. This produces good quality surface results and assures a long disc-performanc
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
The Best for Inox Cutting Disc has an outstanding lifetime when cutting Inox. Through its ceramic-encapsu
 |
Impressive Removal Rate - The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a bril more→liant removal rate and lifetime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The X551 Expert for Metal is …
 |
FEATURES:- Clean results in hard ceramics of all kinds thanks to Turborand- The optimised diamond matrix cuts splinter-free- Compatible with angle grinders- 1.4 mm Cutting width
 |
Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.
Wire & Cup Brushes328
 |
Price from £10.95
Compare prices3→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 60mm M14 x 2.0 Thread
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Diame
 |
Price from £29.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Wheel Brush 115mm M14 Thread
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 115mm.Width: 14mm.Bore: M14.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12,500/min.Addi
 |
Price from £14.95
Compare prices4→Compare prices and buy Bosch 0.5mm Knotted Conical Steel Wire Wheel Brush 100mm M14 Thread
Coarse Finish on Metal - The Heavy for Metal Bevel Brush delivers an extra-coarse surface finish. Its conical bevel brush is fitted with knotted wire for heavy-duty cleaning applications in hard-to-re more→ach areas. It is suitable for cleaning smaller steel surfaces and in grooves or on edges at high circumferential speeds. Ideal for use in metal, this brush is also suitable for removing heavy rust, paint stripping, deslagging, deburring, descaling and cleaning welding seams. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface …
 |
Price from £5.87 up to £5.95
Compare prices3→Compare prices and buy Sealey Decarbonising Brush Set 2pc
• Brassed and crimped steel brushes with flat and pointed fill. Suitable for decarbonising cylinder head ports and components.• Shank ø: 6mm.Brassed and crimped steel brushes with flat and pointe more→d fill. Suitable for decarbonising cylinder head ports and components.• Brassed and crimped steel brushes with flat and pointed fill. • Suitable for decarbonising cylinder head ports and components. • Shank Diameter: ø6mm. • Model No. VS1801Technical Specification:N
 |
Price from £10.95 up to £15.99
Compare prices4→Compare prices and buy Faithfull Flat Wire Brush 125 X 12 X 22,2Mm 0,5Mm FAIWBCT125
Circular Wire Brush, compatible with 125mm (5in) angle grinders with a 22.2 mm (7/8in) bore standard angle grinder flange plate. Twist knot brushes are suitable for the removal of slag, rust, scale or more→even dried cement. Conforms to ISO9001 and DIN EN1083-1 and 2. Max. Cutting Speed: 12,500 rpm. Features: For heavier duty applications Compatible with 125mm angle grinders with a standard flange plate Compatible with 125mm angle grinders with a standard flange plate Maximum speed: 12,500 rpm Specifications: Dimensions: H:15.5 x W:2.5 x D:13.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBCT125
 |
Price from £20.95 up to £24.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush Knot 75Mm Xlock Ss FAIWBT75SSXL
X-LOCK Twist Knot Wire Brush for heavy-duty applications. Ideal for removing rust, paint and varnish. Use on stainless steel, aluminium and non-ferrous metal surfaces. Using standard wire brushes on s more→tainless steel can contaminate and cause the material to rust. The X-LOCK quick change system ensures a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Wire Type: High Tensile Twisted Stainless Steel (304)Diameter: 75mmFitting: X-LOCKWire Size: 0.5mmMax. RPM: 12500 Features: Use on stainless steel, aluminium and non-ferrous metal X-LOCK quick change system for fast change between tools X-LOCK quick change system for fast change between tools …
 |
Price from £10.82 up to £17.95
Compare prices5→Compare prices and buy Bosch 0.3mm Inox Crimped Wire Cup Brush 65mm M14 Thread
Extra-Fine Finish - The Clean for Inox Wire Cup Brush provides an extra-fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications, the wire cup brush is suitable fo more→r cleaning work such as removing coatings and rust. It is ideal for use on medium to large stainless steel, aluminium and non-ferrous metal surfaces, and is also suitable for roughing, matt sanding, paint stripping and texturing. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, …
 |
Price from £13.95
Compare prices4→Compare prices and buy Bosch X Lock Crimped Brass Wire Cup Brush 75mm X-Lock
Extra-Fine Finish on Metal - The X-LOCK Clean for Metal Cup Brush, Crimped Wire, Brass-Coated provides an extra-fine surface finish. Fitted with brass-coated crimped wire for light-to-medium
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
