Bosch GWS 13-125 CIE Professional 060179F002
Cutting Discs221
 |
Expert For Concrete High Speed Diamond Grinding HeadFeatures:Ex
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
 |
Flexovit Flap Discs are ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The angles of the flaps mean more abrasive makes contact with the workpiece than a more→conventional fibre disc which increases productivity. Suitable for use on Metal, wood and paint.Size: 125mm Bore: 22mmGrit: 80Additional Information:&bu
 |
The Tiles Used In Modern Construction Are Often Large, Very Hard And Expensive. Cutting Them To A High Standard Every Time Is Therefore Crucial Yet Difficult. The Expert Hardceramic Tile-Cutting Disc more→Uses Diamond Technology And A Range Of Design Features To Deliver The Best Results Consistently, Even In The Hardest Ceramics. The Bosch Expert Hardceramic X-Lock Diamond Tile Cutting Disc Offers The Best Cut In Hard Tiles. You Can Be Confident Of Achieving A Professional Finish On Every Job With This Diamond Cutting Disc.Features: - Clean, High Quality Cutting With Bosch Diamond Technology.- Chip-Free Cut With Purpose-Designe
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thi more→ckness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …
 |
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs the more→y also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Si
 |
Fast Powerful Cutting - The Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, wh more→ich copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
Wire & Cup Brushes327
 |
Price from £17.95 up to £21.99
Compare prices4→Compare prices and buy Faithfull Wire Conical Brush 115Mm Xlock Ss, Multi FAIWBCTSSXL
X-LOCK Conical Wire Brush for heavy-duty applications. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement from welds, edges and grooves. For use on stainless ste more→el surfaces, aluminium and non-ferrous metal surfaces. Using standard wire brushes on stainless steel can contaminate and cause the material to rust. The X-LOCK quick change system ensures a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Features: X-LOCK quick change system for fast change between tools 0.5mm twist knot stainless steel wire (304) 0.5mm twist knot stainless steel wire (304) Use with stainless steel, aluminium and non-ferrous …
 |
Price from £8.95
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 23mm 6mm Shank
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 23mm.Wire Height: 25mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £7.49
Compare prices3→Compare prices and buy Faithfull Twisted Knot Wire Wheel Brush 100mm M10 Thread
Faithfull Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement. Max. Cut more→ting Speed: 12,500 rpm.Type: Knot conical Diameter: 100 mm Thread: M10 x 1.5 Wire: 0.5 mm twist knot steel Conforms to ISO 9001. and DIN EN1083-1 and 2Additional Information:&bu
 |
Price from £8.99 up to £9.95
Compare prices4→Compare prices and buy Lessmann DIY Cup Brush with Shank 50mm, 0.25 Brass Wire LES43012607
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: more→0.35 Steel, Diameter: 50mm.430.133.07
 |
Price from £30.95 up to £38.99
Compare prices7→Compare prices and buy Sealey Angled Wire Wheel Ø100mm for SA695
• Angled wire wheel for Model No. SA695 Smart Eraser Kit.Angled wire wheel for Model No. SA695 Smart Eraser Kit.• Angled wire wheel for Model No. SA695 Smart Eraser Kit. • Model No. SA695WATechnica
 |
Price from £18.95
Compare prices3→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 75mm M10 x 1.5 Thread
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Diame
 |
Price from £13.95 up to £18.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush 125X M14X2 0,30Mm, Red FAIWBC125
Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for industrial use a more→nd more specialist applications. Features: For cleaning metal surfaces prior to painting M14 thread mount M14 thread mount Specifications: Dimensions: H:15.0 x W:9.0 x D:12.5 cm Colour: Red Guarantee:5 years Material: Metal Model Number: FAIWBC125
 |
Price from £5.49 up to £6.71
Compare prices5→Compare prices and buy Sealey Brassed Steel Cup Brush Ø75mm M14 x 2mm
• Suitable for use with power tools up to the maximum rated rpm.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. C more→rimped brassed steel filaments add extra rigidity and cleaning power.• Suitable for use with power tools up to the maximum rated rpm. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. CBC752Technical Specification:D
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
