Bosch GWS 670 Professional 0601375606
Cutting Discs270
 |
The Turbo Rim design enhances cutting speed and efficiency, reducing vibration and providing a smoother, cleaner cut. Its advanced diamond technology ensures extended tool life and superior cutting po more→wer, making it perfect for heavy-duty applications. Compatible with standard angle grinders and saws, the Makita Diamak Turbo Rim is built for reliable performance and versatility. Features & Benefits • Ideal for concrete Specifications • Diameter: 125mm • Bore Size: 22.23mm • Quantity: 1
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …
 |
Faithfull Abrasive Jumbo Flap Discs contain up to 40% more abrasive than standard flap discs, providing a considerably longer working life. Manufactured from long lasting Zirconia Alumina. Resin bonde more→d for extra strength and durability. Designed for use with most angle grinders of the corresponding size. Ideal for use on wood, metal, plastic and stainless steel.Diam Size 127mmGrade Fine (80 Grit)Bore. 22.23mmAddition
 |
The Best for Ceramic Diamond Cutting Disc delivers clean cuts in tiles for fittings in installation work. Smooth cuts with minimal chipping are made possible by the continuous cutting rim. Additionall more→y, the diamond matrix is optimised to cut through tiles. Use this disc on porcelain, tiles and ceramic. Appropriate for GWS 10,8-76 V-EC Professional cordless angle grinder with 10 mm toolholder • Clean Cuts in Tiles • Best for Ceramic Diamond Cutting Disc delivers clean cuts in tiles • Smooth cuts with minimal chipping are made possible by the continuous cutting rim • Diamond matrix is optimised to cut through tiles Specifications Diameter mm: 125 Bore diameter mm: 22.23 …
 |
A flat metal cutting disc which is ideal for working on steel. Part of a range of Makita reinforced abrasive cutting and grinding discs which are suitable for use with grinders and disc cutters. Speci more→fications • Model No: D-18667 (replaces A-85313) • Diameter: 125mm • Thickness: 2.5mm • Bore: 22.2mm • Quantity: 1 Note generic image is shown for illustration purposes. Please refer to the description for the specifications of the item you will be purchasing Features and Benefits • Flat centre cutting disc • Ideal for cutting steel
 |
DeWalt's Extreme Runtime series of accessories were designed in conjunction with the Flexvolt range and have been optimised for use with cordless power tools.
 |
• Will cut through the toughest of materials; reinforced concrete, steel and cast iron.• Laser welded segments.Will cut through the toughest of materials; reinforced concrete, steel and cast iron. Las more→er welded segments.Techni
Wire & Cup Brushes293
 |
Price from £31.95
Compare prices2→Compare prices and buy Lessmann Knot End Wire Brush 29mm 6mm Shank 456278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 29mm.Wire: 0.35 Steel.Additiona
 |
Price from £12.19 up to £13.95
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (6 Piece)
• Set includes a 25mm wire end brush, 75mm wire cup brush, and three wire wheel brushes (50, 75, 100mm) • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of more→surfaces • Hardened dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance&hell
 |
Price from £13.95
Compare prices3→Compare prices and buy Faithfull Stainless Steel Crimped Wire Cup Brush 100mm M14 Thread WBC100S
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indust more→rial use and more specialist applications.Wi
 |
Price from £17.95
Compare prices3→Compare prices and buy Lessmann 0.35 Cimped Steel Wire Conical Bevel Brush 100mm M14 Thread LES42
The special shape of the bevel brush enables the user to work in hard to reach places. They have been designed for heavy-duty use, for the preparing of metal surfaces before painting, and the removal more→of slag, rust, scale, or concrete waste. Diameter: 100mm.Width: 10mm.Bore: M14.Wire Gauge: 0.35.Wire Type: Steel STA Crimped.Max. R.P.M.: 12,000.Addition
 |
Price from £43.95
Compare prices3→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 125mm M14 x 2.0 Thread LES427177
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Diame
 |
Price from £32.95
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire Conical Knot Brush 115mm M14 Thread LES472157
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed more→for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.Diameter. 115mm.Width. 10mm.Bore. M14.Wire Gauge.0.35.Wire Type. Steel.Max R.P.M. 12,500.Addition
|
Price from £15.95
Compare prices3→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 60mm M10 x 1.5 Thread LES421164
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Lessm
 |
Price from £2.04 up to £2.81
Compare prices7→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 13mm
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
