Bosch GWS 9-115 Professional 0601396006
Cutting Discs315
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
BOSCH 06159975Z4 - Set of 4 Discos Std. 2 x 230 + 2 x lock 115 mm
 |
• Cuts through the toughest of materials including reinforced concrete, steel and cast iron.Cuts through the toughest of materials including reinforced concrete, steel and cast iron.Technical Specific more→ation:Bore: ø22mmDisc Size: ø115mm(
 |
Impressive Removal Rate - The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a bril more→liant removal rate and lifetime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The X551 Expert for Metal is …
 |
• Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• More durable than normal sanding discs.• Abrasive flaps are attached to rigid disc wit more→h epoxy adhesive - does not require backing pad.• Depressed centre discs suitable for electric and air tools.• Size/Bore: ø115/22mm.
 |
Einhell metal cutting discs for use with angle grinders. Suitable for 115mm angle grinders from Einhell as well as various other manufacturers. Supplied as a pack of 10. Features and Benefits • more→Thin cutting discs • Suitable for cutting metal • Compatible with most 115m angle grinders • Pack of 10 discs Specifications • Disc Diameter: 115mm • Bore: 22.23mm • Thickness: 1.0mm • Pack Quantity: 10 Contents • 10 Discs
 |
Designed for cutting concrete and stone with angle grinders, these Stanley cutting discs have a depressed centre so the cutting edge is offset from the nut - this allows for better access in tight spa more→ces. Features and Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 115mm • Bore: 22mm • Thickness: 3mm • Pack Quantity: 1
Wire & Cup Brushes280
 |
Price from £18.95 up to £25.13
Compare prices6→Compare prices and buy Draper Expert Crimped Wire Cup Brush, 100mm, M14
Expert Quality, industrial quality manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. Carton packed.
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 75mm 6mm Shank
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) more→shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS75 Wire Cup Brush has the following specifications: Face Diameter: 75 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £20.95 up to £27.04
Compare prices6→Compare prices and buy Draper Twist Knot Wire Cup Brush, 60mm, M10
Expert Quality, industrial quality manufactured from 0.5mm hardened steel wire. Designed for use with angle grinders. Carton packed.
 |
Price from £4.80 up to £5.36
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 75mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø75mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 75mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø75mm. • Maximum Speed: 4500rpm. • Model No. SFBS75Technical Specification:D
 |
Price from £13.95 up to £18.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush 125X M14X2 0,30Mm, Red FAIWBC125
Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for industrial use a more→nd more specialist applications. Features: For cleaning metal surfaces prior to painting M14 thread mount M14 thread mount Specifications: Dimensions: H:15.0 x W:9.0 x D:12.5 cm Colour: Red Guarantee:5 years Material: Metal Model Number: FAIWBC125
 |
Price from £7.95 up to £11.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush T/Knot 65 X M14X2 0,5Mm, Multi FAIWBT65
Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for industria more→l use and more specialist applications. Features: For heavier duty applications For use with angle grinders For use with angle grinders Specifications: Dimensions: H:11.0 x W:6.0 x D:9.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBT65
 |
Price from £4.49 up to £4.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush 60mm M14x2, 0.30mm Steel Wire FAIWBC60
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indus more→trial use and more specialist applications.
 |
Price from £11.95 up to £14.31
Compare prices5→Compare prices and buy Sealey Wire Brush Set 5pc Brassed
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; Wire Cup; ø50mm, 75mm, Flat Wire; ø50mm, 75mm, ø25mm Decarbonising/C
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
