Bosch GWS 9-115 S Professional 0601396103
Cutting Discs314
 |
Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. more→Specifications • Diameter: 115mm • Bore: 22.23mm • Segment Height: 7mm • Pack Quantity: 1
 |
These premium-quality resin bonded aluminium oxide flap discs provide durability and fast results. The strong X-weight polyester-cotto
 |
• Aluminium oxide flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Pack contains four different levels of abrasion, for assorted applications and more→finishes.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require backing pad.• Depressed centre discs suitable for electric and air tools.Technical SpecificationBo
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock diamond cutting discs are suitable for cutting concrete, granite and marble. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in seconds …
 |
X-LOCK 2-piece changing system to switch angle grinder accessories with just one click. The X-shaped interface of the grinders head and the accessory allows easy and effortless mounting. Features and more→Benefits: Convenient X-Lock locking system for quick and safe changes. Manufactured for use with stainless steel (iron, chlorine and sulphur-free) Fast and clean cuts without burr formation or blue discoloration Quick efficient cutting with minimum material removal and machine wear Achieve straight and accurate cuts Typical Applications: Used across a broad range of industries including Automotive, Foundry, Fabrication, Aerospace and Construction Cutting discs must never be used for grinding …
 |
On Modern Construction Sites You Need To Cut A Wide Variety Of Hard Materials, And These Take Their Toll On Tools. The Expert Multimaterial Disc Is The Ideal Accessory For Busy Construction Profession more→als Needing To Cut Concrete, Brick, Roofing Tiles And Reinforced Concrete - Because It Simply Keeps Doing The Job For Longer. This Mix Of Optimum Diamond Grits And Advanced Design Mean The Bosch Expert Multimaterial X-Lock Diamond Cutting Disc Offers Unmatched Longevity. It Cuts Reliably For Longer Than Even Other Bosch Diamond Discs, Ultimately Providing Great Value.Features:
 |
Measuring 115mm in diameter and featuring a 22.23mm bore size, this diamond blade is specifically designed for compatibility with angle grinders, providing optimal performance and extensive coverage. more→The continuous rim design ensures smooth and clean cutting action, making it ideal for a variety of tile materials, including ceramic, porcelain, and stone. Crafted with high-quality diamonds embedded in the continuous rim, this blade excels in delivering precise and chip-free cuts through delicate tile surfaces. The robust construction ensures longevity, providing you with a reliable tool for repeated use on your tiling projects. Features & Benefits • Continuous rim for fine cutting of ceramic …
 |
Reliable Cuts - The Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-qu more→ality standards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting building materials such as concrete and masonry. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Universal Building Materials • Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials • Optimised …
Wire & Cup Brushes281
 |
Price from £12.52 up to £16.95
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Cup Brush 75mm M14 Thread 2608622099
Extra-Coarse Finish - The Heavy for Metal Wire Cup Brush provides an extra-coarse surface finish. This cup brush is fitted with knotted wire for heavy-duty cleaning applications. Ideal for use in meta more→l, it is suitable for cleaning work on medium to large steel surfaces, such as removing heavy rust, underseal, paint or varnish. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Fits GGS 6 and GGS 8 straight grinders with M14 thread. Features and Benefits …
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Brush 50mm 6mm Shank 2608622006
Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £8.95 up to £14.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush 100X M14X2 0,30Mm FAIWBC100
Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for industrial use a more→nd more specialist applications. Features: For cleaning metal surfaces prior to painting M14 thread mount M14 thread mount Specifications: Dimensions: H:13.5 x W:8.0 x D:11.5 cm Colour: Red Guarantee:5 years Material: Metal Model Number: FAIWBC100
 |
Price from £21.49 up to £23.95
Compare prices4→Compare prices and buy Lessmann Conical Knot Brush 100mm M14 Bore, 0.35 Steel Wire
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed more→for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.
 |
Price from £8.95 up to £14.99
Compare prices4→Compare prices and buy Faithfull Wire Brush Shaft Mtd 70 X 25Mm 0,30Mm FAIWBSI70
Industrial Wire Cup Brush for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Max. Cutting Speed: 12 more→,500 rpm.Shaft: 6mm (1/4in). Features: 6mm shank For cleaning paint or deburring moulds or castings For cleaning paint or deburring moulds or castings Suitable for hard-to-reach areas Can be used in industrial power tools at higher speeds Specifications: Dimensions: H:12.5 x W:5.0 x D:8.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBSI70
 |
Price from £16.27 up to £16.95
Compare prices5→Compare prices and buy Draper Expert Brassed Steel Wire Cup Brush 60mm M14 Thread
Expert Quality, industrial quality manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. Features and Benefits • Expert Quality • For angle grinders &bu more→ll; 0.3mm hardened brassed steel wire Contents 1 x Draper Expert Crimped Wire Cup Brush, 60mm, M14
 |
Price from £8.95
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 23mm 6mm Shank LES453161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 23mm.Wire Height: 25mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £7.23 up to £9.11
Compare prices6→Compare prices and buy Draper Crimped Wire Cup Brush, 80mm, M14
Manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. M14 thread. Display packed.
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
