Bosch POF 1400 ACE 060326C801
Diamond Core Bits & Milling Cutters1889
 |
For coves and part of a rule joint. Specifications • Shank Diameter: 1/4 • Dia Metric: 3.2 • Dia Imperial: 1/8 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Over more→all Length Metric: 59.5 • Radius 1 Metric: 1.6
 |
8-piece countersink bit set in a stable plastic box for countersinking and deburring. The hexagonal shaft ensures very good power transfer. Ensures rattle and score-free working. Perfect chip removal more→and great durability. High quality, ergonomic bit holder equipped with a magnet. The Rapidaptor ensures rapid bit change without any extra tools. For insertion in the power screwdriver or for use in the chuck of the electric drill. Features and Benefits • Ideal for mobile repair and assembly work • Rapid, uncomplicated change between drill, countersinking or screwdriving bit • 1/4" drive suitable for power screwdrivers • For countersinking and deburring • 1-flute Contents …
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 63 • Overall Length Metric: 105
 |
Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Specifications • Shank Diameter: 1/2 • Dia Metric: 31.9 • Dia2 Metric: 28.6 • C more→ut Length Metric: 22.5 • Overall Length Metric: 71 • Bearing Dia Metric: 16 • Radius 1 Metric: 7
 |
For use with the Leigh Dovetail Jig. This cutter has an extra long shank for cutting dovetail pins. Specifications • Shank Diameter: 1/4 • Dia Metric: 8 • Cut Length Metric: 26 • more→Overall Length Metric: 70
 |
The Stanley STHT1-05-878 Drywall circle cutter is ideal for cutting perfect holes in drywall up to 16 inches (400mm) in diameter. The cutter is precision calibrated for accuracy and has easy-to-read more→standard markings. The pin adjusts up and down and easily slides to adjust.PTDSTA10
 |
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 4/5 x 1/4 TCT Two Flute Cutter has the following specification: D: 19mm (3/4in)C: 25mmOL: 58mmShank Diameter: 1/4inPTDTRE4514
 |
These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut is required. Specif more→ications • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 63
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
