Bosch PWS 750-115 06033A240C
Cutting Discs271
 |
Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. more→Specifications • Diameter: 115mm • Bore: 22.23mm • Segment Height: 7mm • Pack Quantity: 1
 |
Designed for cutting metal with angle grinders, these Stanley cutting discs have a depressed centre so the cutting edge is offset from the nut - this allows for better access in tight spaces. Features more→and Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 115mm • Bore: 22mm • Thickness: 3mm • Pack Quantity: 1
 |
The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore crucial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc more→uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics.The Bosch EXPERT HardCeramic X-LOCK Diamond Tile Cutting Disc offers the best cut in hard tiles. You can be confident of achieving a professional finish on every job with this diamond cutting disc.Features:- High Precision Cutting Hard Tiles- Clean, high quality cutting with Bosch Diamond Technology.- Chip-free cut with purpose-designe
 |
• Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• More durable than normal sanding discs.• Abrasive flaps are attached to rigid disc wit more→h epoxy adhesive - does not require backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø115/22mm.
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock diamond cutting discs are suitable for cutting concrete, granite and marble. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in seconds …
 |
Cuts materials that angle grinders previously couldn’t - Professionals value angle grinders for their ability to cut tough materials like concrete, stone and metal. With the EXPERT Carbide Multi Wheel more→this wonderful tool can be even more versatile, efficiently cutting all kinds of softer materials such as wood, plastic and modern composites. The EXPERT Carbide Multi Wheel uses sharp carbide grits on its rim to cut multiple materials extremely effectively. The grits are joined to a steel body by a laser technique for an extra strong bond, giving a safe and reliable cutting disc that maintains a constant speed and depth throughout a long lifespan. With the EXPERT Carbide Multi Wheel, your angle gr…
 |
The Marcrist BF350 Turbo Precision Diamond Blade is a top tier cutting tool designed for fast, accurate cuts across a wide range of materials. Engineered with high-quality diamond segments and a turbo more→rim design, this blade delivers exceptional cutting speed and precision. The BF350's innovative turbo rim enhances airflow, reducing heat buildup and minimising the risk of warping or blade damage during intense use. This results in smoother, cleaner cuts with minimal chipping, even on hard materials like concrete, stone, and brick. Suitable For • General Purpose • Masonry • Concrete • Facing Bricks • Block Pavers • Dry Wall • Plasterboard • Clay Roof Tiles …
 |
Reliable Cuts - The Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-qu more→ality standards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting building materials such as concrete and masonry. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Universal Building Materials • Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials • Optimised …
Wire & Cup Brushes208
 |
Price from £13.95
Compare prices3→Compare prices and buy Lessmann Crimped Wire Wheel Brush 70mm 6mm Shank 417163
The Lessmann Wheel Brushes are fitted with a 6mm shank. The tight filling wire and powerful running makes these brushes excellent tools. These encapsulated brushes have a long service life due to the more→bedding of wire in plastic, which also prevents end breakage. The brushes have a consistent working width.The Lessmann Knotted Wheel Brush With Shank has the following specification: Wire Type: SteelDiameter: 70mmWidth: 13mmShank: 6mmWire Gauge: 0.30Max Speed: 15,000/rpmAddit
 |
Price from £13.49 up to £14.95
Compare prices5→Compare prices and buy Bosch X Lock Crimped Wire Wheel 115mm X-Lock 2608620732
Extra-Fine Surface Finish - The X-LOCK Clean for Metal Wire Wheel provides an extra-fine surface finish. It is fitted with crimped wire for light-to-medium
 |
Price from £5.49 up to £6.71
Compare prices5→Compare prices and buy Sealey Brassed Steel Cup Brush Ø75mm M14 x 2mm
• Suitable for use with power tools up to the maximum rated rpm.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. C more→rimped brassed steel filaments add extra rigidity and cleaning power.• Suitable for use with power tools up to the maximum rated rpm. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. CBC752Technical Specification:D
 |
Price from £16.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Cup Brush 65mm M10 x 2.0 Thread LES482214
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M10.Wire Gauge. 0.50. Wire Type. Steel.Max. R.P.M. 12,500.Addition
 |
Price from £3.49 up to £3.71
Compare prices5→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 26m
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
 |
Price from £6.95 up to £8.40
Compare prices4→Compare prices and buy Sealey Wire Brush Set 8pc Brassed
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm (x1), ø more→75mm (x1), Removable Shafts (x3).• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. Crimped brassed steel filaments add extra rigidity and cleaning power. Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm(x1), ø75mm (x1), Removable Shafts (x3).• Suitable for use with power tools up to the maximum rated speed (4500rpm). • Shaft: ø6mm. • Contents: Brushes; Flat Wire …
 |
Price from £10.95
Compare prices3→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 60mm M14 x 2.0 Thread LES421167
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Diame
 |
Price from £16.27 up to £20.57
Compare prices6→Compare prices and buy Draper Expert Crimped Wire Cup Brush, 60mm, M14
Expert Quality, industrial quality manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. Carton packed.
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
