CATerpillar DX38
Cutting Discs92
 |
A flat metal cutting disc which is ideal for working on steel. Part of a range of Makita reinforced abrasive cutting and grinding discs which are suitable for use with grinders and disc cutters. Speci more→fications • Model No: D-18683 • Diameter: 180mm • Thickness: 2.5mm • Bore: 22.23mm • Quantity: 1 Note generic image is shown for illustration purposes. Please refer to the description for the specifications of the item you will be purchasingFeatu
 |
On Modern Construction Sites You Need To Cut A Wide Variety Of Hard Materials, And These Take Their Toll On Tools. The Expert Multimaterial Disc Is The Ideal Accessory For Busy Construction Profession more→als Needing To Cut Concrete, Brick, Roofing Tiles And Reinforced Concrete - Because It Simply Keeps Doing The Job For Longer.This Mix Of Optimum Diamond Grits And Advanced Design Mean The Bosch Expert Multimaterial Diamond Cutting Disc Offers Unmatched Longevity. It Cuts Reliably For Longer Than Even Other Bosch Diamond Discs, Ultimately Providing Great Value.Features:
 |
DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 180 mm • Thickness: 1.5 mm • Bore Size: 22.23 mm Features and Benefits: • Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction …
 |
1 x Vitrex Hi Glaze Diamond Blade 180mm
 |
The Backing Pad is resistant to high temperatures and breakage. It provides low vibration during use, which increases its endurance. The pad is compatible with fibre sanding discs that include a nut a more→nd has a maximum speed of 13,300 rpm. It is intended for use with angle grinders.Backin
 |
Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thi more→ckness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …
 |
The Makita A60U Thin Stainless Steel Cutting Discs are engineered for precision and efficiency in cutting stainless steel and other metals. These high-quality discs feature a thin 1mm profile, enablin more→g fast, clean cuts with minimal material loss and reduced burr formation. Constructed from premium materials, the Makita A60U discs deliver exceptional durability and long-lasting performance. The superior bonding and advanced grain technology provide consistent cutting power, ensuring optimal performance throughout the disc's lifespan. These cutting discs are designed to be used with angle grinders, offering versatility for various metal cutting tasks. The discs are reinforced with fiberglass to …
 |
Makita's A36N grinding discs were designed to out-perform all other aluminium grinding discs on the market. The unique bond structure is a combination of grit impregnated with a substance called stear more→ic acid. This specially formulated mix ensures lubrication is present between the grit and work surface at raised emperatures. Due to the low melting point of aluminium, problems can arise once a grinding surface reaches melting point. The useful substance present within the bond structure acts as a lubricant to reduce friction between grit and workpiece. Lower friction = less heat build up. By reducing the heat element, there is less possibility of melted aluminium sticking to the grinding disc …
Abrasive Wheels & Belts5320
 |
• For light grinding work. Thanks to the flexibility of the disc, it is ideally suited to working on curved surfaces. Other advantages of the disc: less vibration and noise development, cool grin more→ding (less heat discolouration)
 |
The Clean for Inox Tapered Brush provides an extra-fine surface finish. Its conical tapered brush is fitted with crimped wire for light- to medium-duty cleaning applications in hard to reach areas, ma more→king it ideal for the cleaning of smaller areas at high circumferential speeds. The brush can be used on stainless steel, aluminium or non-ferrous metal surfaces and on edges or in grooves. It is also suitable for removing rust, roughing, matt sanding, paint stripping and removing annealing colour on welded seams. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner …
 |
The Standard for Metal Grinding Disc is a reliable choice for grinding work on metal. Its aluminium oxide abrasive grain is well suited for general metal applications. It is intended for grinding meta more→l. Maximum work safety thanks to the optimum three-layer fibreglass net. Manufactured in accordance with EN12413 It is suitable for use with hand-held angle grinders.• Reliable Choice for Metal• Standard for Metal Grinding Disc is a reliable choice for metal grinding• Aluminum oxide abrasive grain, functional fillers, additives with phenol resin bond matrix suited for metal applicationsSpe
 |
The Wire Cup Brush delivers an extra-fine surface finish. This Wire Cup Brush is fitted with brass-coated crimped wire for light-to-medium
 |
The X571 Best for Metal is compatible with angle grinders. The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia al more→umina/semi-fria
 |
The Standard for Metal Grinding Disc is a reliable choice for grinding work on metal. Its aluminium oxide abrasive grain is well suited for general metal applications. It is intended for grinding meta more→l. Maximum work safety thanks to the optimum three-layer fibreglass net. Manufactured in accordance with EN12413 It is suitable for use with hand-held angle grinders.• Reliable Choice for Metal• Standard for Metal Grinding Disc is a reliable choice for metal grinding• Aluminum oxide abrasive grain, functional fillers, additives with phenol resin bond matrix suited for metal applicationsSpe
 |
17.50Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Sanding Brush / Stainless Steel / Quantity 1 Piece / Grey / Sanding Form Round / Disc Diameter 115 mm
 |
Sanding Disc / For Festool / Plastic / Grit 80 / Sanding Form Round / Disc Diameter 133 mm
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
