Celma Professional PRCm 13GEO

Hole Saw Guidance - The Pilot Drill Bit drills the pilot hole in order to guide the hole saw into position. Use this pilot bit when cutting holes through a wide variety of materials. It is suitable fo more→r use with all corded and cordless drill drivers. For use with the Bosch Power Change keyless arbor. Features and Benefits • Hole Saw Guidance • Pilot Drill Bit drills the pilot hole in order to guide the hole saw into position • Pilot bit cuts holes through a wide variety of materials Specifications Diameter: 7,15mm Shank, shape: Hexagon Shank type: Hexagon Total length: 65mm Application materials: Steel sheets; Stainless steel sheets

• Manufactured from HSS M2 steel for fast and accurate hole drilling.• Universal 19mm Weldon shank means this rotabor is suitable for use with Sealey and other leading brands of magnetic drills.• Avai more→lable in 25mm and 50mm cutting depths.Manufactured from HSS M2 steel for fast and accurate hole drilling. Universal 19mm Weldon shank means this rotabor is suitable for use with Sealey and other leading brands of magnetic drills. Available in 25mm and 50mm cutting depths.Technical Specification:Cutting Depth: 50mmSize: ø39mmDimensions: Length: 45mm x Height: 45mmWeight: 0.24KgWarranty: Consumable

The Hultafors Scandinavian Butt Chisel is an everyday chisel, sharp, reliable and always at hand. Ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The more→chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic deposition (EPD). Supplied in a smart holster with a clip for easy access at all times.Hultafors EDC25 Scandinavian Butt Chisel. Blade: 25mm.Overall Length: 232mm.Additional Information:• Chisel Type: Butt• Size (mm): 25

Maximum Precision - The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect more→centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.…

The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother qualit more→y finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502788 Auger drill bit has the following dimensions:Drillbit diameter: 40.0mmTotal length: 240mmWorking Length: 175mmAdditional Information:• Diameter (mm): 40• Overall Length (mm): 240• …

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar more→and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

Wood Chisel / Total Length 140 mm / Feed Opening 16 mm / 1 Piece

The SDS Plus Mixed Chisel Set is a collection of three top quality chisels including pointed, flat and spade - suited for virtually any task. Especially suited for work in concrete, tile, mortar and o more→ther masonry materials. It includes a pointed chisel for demolition and renovation, a 20mm flat chisel for precision cutting, and a 40mm spade chisel ideal for light demolition work, removing large areas of plaster, and for loosening earth, bitumen, and screed. Each chisel is crafted from high-grade steel with a hardening process which ensures a long working life. The SDS plus system allows users to switch between chisels without the need for tools. Suitable for concrete, tile, mortar, and other …

Less Jamming in Concrete - The SDS plus Pointed Chisel is ideal for precision jobs in concrete without any work interruptions and with less jamming than standard pointed chisels. The self-sharpening t more→wisted tip provides a wider material removal footprint, which allows for smooth, uninterrupted work. The chisel is intended for use in concrete and brick for adjustment work to destroy or remove walls, restore joints and clear reinforcements. It is compatible with an SDS plus chisel attachment or it can be used directly in SDS plus hammers with a rotation stop. The SDS plus Pointed Chisel offers a 30%-longer lifetime and a 15%-higher material removal rate than standard chisels. Fits all SDS plus …

Makita 5 Piece SDS Plus Chisel Set suitable for concrete, demolition, render, chasing, tiles and channelling. Features and Benefits • Application: Concrete, demolition, render, chasing, tiles, ch more→annelling • Forged and tempered cold chisels • Aluminium case Specifications • Shank: SDS Plus • Pack Quantity: 5 Contents • Bull Point 250mm (x2) • Cold Chisel 250mm (x2) • Scaling Chisel 250mm • Aluminium Case

Not available.

Bahco 434 Series Bevel Edge Chisel has been developed according to the scientific ERGO process. The 2-component grip, splitproof handle allows repeated hammer blows, and the blades are manufactured fr more→om hardened and tempered steel, which are precision ground for maximum sharpness and long-lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with a safety guard and have rounded shoulders for added safety.