CMT CMT10
Diamond Core Bits & Milling Cutters1582
 |
Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Specifications • Shank Diameter: 1/2 • Dia Metric: 38.1 • Dia2 Metric: 34.7 • C more→ut Length Metric: 26 • Overall Length Metric: 74 • Bearing Dia Metric: 16 • Radius 1 Metric: 9.5
 |
Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exc more→eed cutter diameter. Specifications • Shank Diameter: 1/4 • Dia Metric: 4.8 • Dia Imperial: 3/16 • Cut Length Metric: 11.1 • Cut Length Imperial: 7/16 • Overall Length Metric: 56.5
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 21 • Dia Imperial: 53/64 • Cut Length Metric: 19 • Overall Length Metric: 59
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 50 • Dia Imperial: 1 31/32 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 64
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 25 • Overall Length Metric: 71
 |
A bearing guided, tungsten carbide tipped cutter producing a 45° chamfer to a maximum depth of 10mm. Suitable for use on softwood, hardwood and all man-made boards.Shank: 1/4in. Features: Produces more→a 45° chamfer to a maximum depth of 10mm TCT cutting edges TCT cutting edges Bearing guided Specifications: Dimensions: H:12.0 x W:3.0 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB81
 |
Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hinges. Co more→rners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 3/83 x 1/2 TCT Two Flute Workshop Cutter has the following specification: D: 12.7mm (1/2in)C: 50mmOL: 108mmShank Diameter: 1/2in For use with professional routers that have a 80mm deep plunge. One piece multi-slit collet to ensure safe cutter retraction into base. Designed for hollow honeycomb board worktops.PTDTRE
 |
Cutters with guide bearing reduce setting up time for curved workpieces. Specifications • Shank Diameter: 1/4 • Dia Metric: 20.7 • Overall Length Metric: 47 • Bearing Dia Metric: more→12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 4
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
