CMT CMT8E
Diamond Core Bits & Milling Cutters1897
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 11 • Dia Imperial: 7/16 • Cut Length Metric: 25 • Overall Length Metric: 57
 |
This Tungsten Carbide tipped cutter is similar to an ovolo cutter and provides a rounded profile along the edge of the material.It differs from ovolo cutters by producing a single step only. Shank: 1/ more→4in. Features: Produces a stepped rounded profile along the edge of the material TCT cutting edges TCT cutting edges Guide pin enables the cutter to follow intricate shapes Differs to Ovolo cutter by producing a single step only Specifications: Dimensions: H:12.0 x W:3.0 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB41
 |
For picture hanging flush to the wall. Plunge cutter & move forward, then retract out from entry hole. A template is recommended. For No8 & No10 screw heads. Not suitable for grooving applicati more→ons. Specifications • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Dia2 Metric: 4.5 • Cut Length Metric: 4.5 • Cut Length Imperial: 11/64 • Overall Length Metric: 53
 |
The Dormer S904 Carbide MC-X Plain Shank Multi Flute End Mill is designed for precise and efficient machining tasks. Featuring a regular length and 4 flutes, this solid carbide end mill is engineered more→for shoulder milling applications in free-machining, plain carbon, and alloy steels, as well as malleable, ductile, and compacted graphite cast iron, copper, and copper alloys. The bright finish enhances chip flow, while the 30° helix and 12° rake angle deliver smooth cutting performance. Chamfered corner edges provide added durability and reduce the risk of chipping, making it ideal for demanding milling tasks. Features and Benefits • Bright (uncoated) • Hard Material (Solid Carbide) &b…
 |
Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimi more→ses heat and resin build-up for increased cutter performance and longevity. 1/2in shank for heavier workloads ideal for router table work and for use in bigger routers. The 'K' mark shank ensures safe working practices. Suitable for a wide range of applications such as engraving grooving rebating and shallow morticing. Use on softwoods hardwoods MDF plywood and chipboard.The Trend C172 x 1/2 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12mm (15/32in)Cuttin
 |
Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hinges. Co more→rners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 4/8 x 1/2 TCT Two Flute Cutter has the following specification: D: 25.4mm (1in)C: 25mmOL: 68mmShank Diameter: 1/2inPTDTRE4812
 |
Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine ' V' groove point. Ideal for sign writing. Specifications • Shank Diameter: 8 mm • Dia Metric: 14.5 &b more→ull; Cut Length Metric: 12.5 • Overall Length Metric: 57 • Angle: 60
 |
Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template. Can be used for 8mm dowels. For drilling machines or routers. Specifications • Shank Diameter: 1/4 &bul more→l; Dia Metric: 8 • Cut Length Metric: 35 • Overall Length Metric: 70
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
