Crown CT11012 (422491)
Diamond Core Bits & Milling Cutters2277
 |
Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. A range of sizes available to suit 4mm thick strip from 10mm to 25mm width. Intumescent strip more→is used to create an effective barrier to both fire and smoke. Choose alternative bearings to suit other thicknesses of intumescent strip. Specifications • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 25 • Overall Length Metric: 74 • Bearing Dia Metric: 32 • Rebate Metric: 4 • Type or Grade: 25mm strip
 |
For use in a router table only. Take 3 - 4 passes, increasing the depth with each pass. Suitable for straight panels only. Specifications • Shank Diameter: 1/4 • Dia Metric: 28 • Dia more→Imperial: 1 7/64 • Dia2 Metric: 9.5 • Cut Length Metric: 30 • Cut Length Imperial: 1 3/16 • Overall Length Metric: 70 • Radius 1 Metric: 22 • Radius 2 Metric: 18
 |
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications • Shank Diameter: 8 mm more→• Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 53 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 8 mm • Dia Metric: 12.55 • Dia Imperial: 1/2 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 66
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 8 mm • Dia Metric: 7.9 • Dia Imperial: 5/16 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 62.5
 |
Trend 8mm diameter down cut spiral cutter - 8mm shank, 25mm cut length. Spiral downcutting configuration offers the cleanest finish on the top surface of the workpiece when used in hand held or overh more→ead CNC routing applications. Two flute design is ideal for superior crosscutting performance in all timbers and on veneered sheet materials. Spiral design offers clean plunge cutting with reduced vibration under load for premium finishes. Down-cut spirals are ideal for hand held work and also in CNC machines. Chips are forced downwards as the cut is made so require a lower feed speed. Ultra-durable Solid Tungsten Carbide construction for increased performance and strength in all materials including …
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 37 • Overall Length Metric: 79
 |
Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive m more→aterial. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.35 • Dia Imperial: 1/4 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 63 • Overall Length Imperial: 2 1/2 • Type or Grade: Up-cut
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
