Crown CT13029
Cutting Discs123
 |
Lasts up to 50x longer than a Bi-Metal blade in tough materials - Cutting out windows for replacement or during demolition was a tough job when it involved sawing multiple window materials such as ste more→el-reinforced wood or plastic. Since window fixing screws started using high-tensile engineering steel, the old Bi-Metal blades don’t get through a single screw. The Bosch EXPERT ‘Window Demolition’ Reciprocating Saw Blade is a window demolition blade for the modern era. Backed by Bosch Carbide Technology, its teeth tear through the toughest, strongest fixing screws – and survive to do it again. The short length, tapered tip and side set carbide teeth are all designed with the specific task in mind:…
 |
Lasts up to 50x longer than a Bi-Metal blade in tough materials - In vehicle rescue, getting into a car fast can be a matter of life and death. Emergency services are increasingly using reciprocating more→saws as a valuable rescue tool, but they require a seriously good blade that can reliably cut through modern automotive steel. The EXPERT ‘Vehicle Rescue’ is designed for this crucial task. As well as having ultra-hard carbide in its teeth, this vehicle demolition EXPERT has a special tip design that allows the blade to plunge cut into sheet metal. This is used in typical rescue methods such as cutting an extra door or accessing passengers through the roof. The short S957CHM version is ideal for …
 |
Milwaukee Cast Iron / Fibreglass Reciprocating Saw Blades. TC Grit sawzall blades designed for maximize performance in specific cutting applications. Durable, long life blades are the goal of every bl more→ade made. This blade has a 1/2 inch universal tang that fits all Sawzalls and standard competitive saws. Suitable for special applications such as cast iron, abrasive materials and fibreglass. Specifications • Blade Length: 150mm • Material Type: TC • Max. Cutting Capacity (Cast Iron Pipes): 10-100mm • Max. Cutting Capacity (Fibre Glass): 3-100mm • Max. Cutting Capacity (Metal Pipe): 10-100mm • Pack Quantity: 3 Features and Benefits • TC Grit sawzall blades designed …
 |
Milwaukee Wood / Metal / Plastic Universal Saw Blades. Its even width guarantees good cutting stability, excellent guidance and straight edge cutting through many different materials. Bi-metal quality more→cutting teeth with 8% cobalt for ultimate performance and extended lifetime. Specifications Blade Length: 150mm Teeth per Inch: 8/12 Max. Cutting Capacity (Aluminium): 3-10mm Max. Cutting Capacity (Non Ferrous Metals): 3-10mm Max. Cutting Capacity (Plastic Pipes): 3-100mm Max. Cutting Capacity (PVC): 10-50mm Max. Cutting Capacity (Sandwich Material): 5-100mm Max. Cutting Capacity (Steel): 3-10mm Max. Cutting Capacity (Wood with Nails): 5-100mm Pack quantity: 5 Features and Benefits • Bi-metal …
 |
Milwaukee Heavy Duty Demolition Reciprocating Saw Blades. Improved tooth geometry for best speed and double the lifetime. Bi-metal quality cutting teeth with 8% cobalt giving the ultimate in performan more→ce and lifetime. TOUGH NECK: Stamped indentations around the reception strengthens the blade at its weakest point. Slim 0.90 mm thick blade body optimised for maximum speed and flexibility. Specifications • Blade Length: 150mm • Teeth per Inch: 18 • Max. Cutting Capacity (Steel Plate): 1.5-4mm • Max. Cutting Capacity (Inox): 1.5-4mm • Max. Cutting Capacity (Metal Pipe): 10-100mm • Max. Cutting Capacity (Non Ferrous Metals): 1.5-4mm • Max. Cutting Capacity (Steel): …
 |
Very quick cutting blade: Wood and plastics, polystyrene foam. Suitable for curves and bevels.Features
 |
Lasts up to 50x longer than a Bi-Metal blade in tough materials - Cutting thin sheet metal and thin wall pipes is a tough job, but with a good recip saw blade you can manage: the real problems start w more→hen you cut stainless steel. This tough, high-alloy steel is an obstacle to construction or renovation workers and destroys blades. Bosch Carbide Technology consigns these problems to the past. The EXPERT ‘Thin Tough Metal’ is a leap forward in recip saw blade development, where the hardest metal is integrated into a tooth design optimised for steel sheets and pipes. The teeth are ground to a fine geometry that allows even thin sheets of stainless steel to be cut smoothly. Ideal for metal workers, plu…
 |
CK750 blades are described as having a Fast Tile CutFeatures:- Marcrist diamond products comply with every known safety standard worldwide- Titanium coated diamonds provide self cooling and self sharp more→ening cutting edge- Armoured centre for blade strength beyond belief (Patented)- Precision engineered core, hardened, ground, balanced and tensioned- Noise suppression for semi silent operation (Patented)- Ulta thin diamond edge guarantees lighting fast cutting- Segments are formed under vacuum and extreme pressure and fused to the corde. This results in a extreme bond homogenity and adhesion for outstanding performance and safetyMaterials
Wire & Cup Brushes322
 |
Price from £39.95
Compare prices3→Compare prices and buy Lessmann X Lock Non Sparking Stainless Steel Knotted Wire Wheel 115mm X-Lo
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Stainless Steel Knot Bevel Brush 115mm Non Spark
 |
Price from £3.49 up to £4.01
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 50mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø50mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 50mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Width: ø50mm. • Maximum Speed: 4500rpm. • Model No. SFBS50Technical Specification:D
 |
Price from £18.95 up to £25.13
Compare prices6→Compare prices and buy Draper Expert Crimped Wire Cup Brush, 100mm, M14
Expert Quality, industrial quality manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. Carton packed.
 |
Price from £14.95 up to £19.99
Compare prices5→Compare prices and buy Faithfull Wire Cup Brush Knot 75Mm Xlock FAIWBT75XL
X-LOCK Twist Knot Wire Brush for heavy-duty applications. Ideal for removing rust, paint and varnish from steel surfaces. The X-LOCK quick change system ensures a fast, reliable and effective one clic more→k change between tools when used with a compatible angle grinder. Features: Use on steel X-LOCK quick change system for fast change between tools X-LOCK quick change system for fast change between tools 0.5mm twist knot steel wire Specifications: Dimensions: H:11.5 x W:6.0 x D:9.5 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBT75XL
 |
Price from £6.95
Compare prices5→Compare prices and buy Sealey Conical Wire Brush Ø100mm M10 x 1.5mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
 |
Price from £3.89 up to £5.53
Compare prices6→Compare prices and buy Draper Rotary Wire Brush, 6 x 100m
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £5.95 up to £5.99
Compare prices7→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Pencil Brush 25mm 6mm Shank 1609200269
Fine Finish on Steel - The End Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small steel surfaces. Its shape makes it ide more→al for cleaning work in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The end brush is also suitable for removing rust, roughing, matt sanding and paint stripping. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Cylindrical shank …
 |
Price from £4.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 50mm 6mm Shank STA36020
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 50mm • Wheel Thickness: 10mm • Shank Diameter: 6mm
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
