Dedra DED7836

Maximum Precision - The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect more→centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.…

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

This range of Bosch HSS drill bits have a reduced shank. Suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. Key more→Features of this Bosch Reduced Shank Drill Bit: - PointTeQ tip design remains sharp and ensures continuous durability for fast drilling in metal - Increased drilling rate generates less heat and wear - Self-centering tip prevents wandering for quick and easy drilling starts - High elasticity for low risk of breakage - Black-oxide coated flute provides fast chip removal - Manufactured to DIN 338, Type N (flute angle), 135 tip

Guhring No 201 50 Piece HSS 1.0 -5.9mm By 0.1mm Drill Set. Type N DIN 338. For drilling steel and cast steel, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. 118&de more→g; point angle. Supplied in a metal indexed case. Contents • 1, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, 2, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 3, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4, 4.1, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, 5, 5.1, 5.2, 5.3, 5.4, 5.5, 5.6, 5.7, 5.8, 5.9mm All Guhring drills are manufactured in Germany using quality German steel.

The Einhell "S" Case measures 175mm x 80mm x 35mm and uses interchangeable inserts which allows the user to add or remove accessories if required. The robust locking clip closure helps to keep content more→s secure while being transported between jobs, and the transparent lid enables quick identification of the contents when you're searching for the right accessory. This HSS drill bit set contains metric sizes from 2mm to 6.5mm in 5mm increments. Made from robust HSS 4241 steel for durability, the bits have a 135° split point tip which enables fast centering and reduces the required contact force. They feature a type N spiral, which is standardised according to DIN 338 - this enables optimal chip …

The Dormer A520 HSS TiN ADX Stub Drill Bit is a high-performance tool engineered for precision and durability. Designed with a Titanium Nitride coating, this stub drill bit offers exceptional wear res more→istance and heat dissipation, ensuring extended tool life and consistent cutting efficiency. Made from high-speed steel, it provides robust performance across a variety of materials, including steel, aluminium, and plastics. The A520 features a 130° split point that ensures accurate and quick starts, minimising bit walking and enhancing drilling precision. The ADX geometry optimises chip removal, reducing friction and heat build-up, making it ideal for high-speed drilling applications. Its shorter …

This corner chisel is used for knocking out rounded corners from a routed hinge recess. Hit once with a mallet and pare out waste. Features: Spring-loaded, aluminium-bodied corner jig High quality tun more→gsten steel Useful for woodworking and general DIY Specifications: Dimensions: H:2.0 x W:3.0 x D:8.0 cm Colour: Red Material: Metal Model Number: CC70

Acc. to DIN 6450 GEDORE vanadium steel Carefully hardened and tempered along the full length Striking heads inductively tempered Working edge polished and clear varnished Special sizes available more→on request

SDS-Max fins 380x35mm Chisel.Features: - Winged gouging chiselSpecifications: - Length: 380 mm

Chiselling in Concrete and Brick - The SDS max Pointed Chisel delivers standard chiselling for various demolition applications. Its pointed tip makes precise adjustment work in concrete possible. The more→chisel is intended for use in concrete and brick, including mortising, demolition and adjustment work, in addition to restoring joints and clearing reinforcements. It is compatible with SDS max shank systems. Fits all SDS max rotary hammer drills. Features and Benefits • Standard Chiselling in Concrete and Brick for Various Demolition Jobs • SDS max Pointed Chisel delivers standard chiselling in concrete and brick for various demolition applications • Pointed tip makes precise adjustment …

SDS max RTec Sharp Flat Chisel is ideal for various applications in concrete with less jamming and more progress.Features:- Self-sharpening power ribs provide a higher material removal rate that preve more→nts the chisel from getting stuck- Fits all SDS max rotary hammer drills.- The RTec element delivers a higher material removal rate than standard flat chisels.- It is compatible with SDS max shank systems.Specifications:- Total length mm: 400- Chisel cutting edge mm: 25- Shank, shape: SDS max

Firmer chisel set, 6pcs., short length, light pattern, bevelled edges, with flat hornbeam handle in display box.Specifications:Equipment: - Material Handle: Hornbeam- Bevelled Edge: Yes- Quantity: 6- more→Sizes: 6, 10, 12, 16, 20, 26 mm