DEKO DKAG15Y50
Cutting Discs402
![]() |
The X571 Best for Metal is compatible with angle grinders. The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia al more→umina/semi-friable aluminium oxide grit is tough and wear-resistant for extensive metalwork. This product is intended for metal. The grit is bonded using fully synthetic resin for wear-resistance in heavy-duty applications on a backing material made of robust x-cloth for long-term use. The carrier plate is available in angled and straight, fibreglass and plastic versions.
![]() |
Lasts up to 4x longer than a standard multi material diamond discOn modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The Expert MultiMate more→rial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer.The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity.This mix of optimum diamond grits and advanced design …
![]() |
The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a brilliant removal rate and lif more→etime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. It is available in angled or straight options on fibreglass …
![]() |
The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a brilliant removal rate and lif more→etime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. It is available in angled or straight options on fibreglass …
![]() |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø115/22mm.Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation. Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require backing pad. Depressed centre disc suitable for electric and air tools.• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation. • Abrasive fla…
![]() |
2.09Buy!
£
£
Electricalworld.com
Delivery: in United Kingdom
Report
These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. They have a self-sharpening feature, which increases high stock removal and durability. more→The strong X-weight polyester-cotton backing allows flexible and fast cutting on medium to high-pressure grinding and finishing applications. The T-29 conical shape features 15–25 ° angled flaps, ideal for contoured and flat-edged work. Suitable for sanding, grinding, stock removal and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 115mm angle grinders with a 22.23mm bore.
![]() |
The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, which copes with de more→manding applications while delivering good results. Moreover, the disc's precision-manufactured fibreglass net ensures high stability and safety when cutting. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. Use this disc for cutting metal. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. X-LOCK cutting discs also fit standard angle grinders.Straight• Fast and Powerful Cutting in Metal• X-LOCK Expert for …
![]() |
The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. Bosch cutting discs comply with the m more→aximum safety requirements, such as EN 12413. It is compatible with angle grinders.Straight• Reliable Cutting in Metal• Standard for Metal Cutting Disc cuts reliably through metal• The aluminium oxide disc is designed for general use with metalSpecifications:Specification: A 30 S BFDiameter mm: 115Bore diameter mm: 22,23Thickness mm: 2,5Materials:Ferrous metalsMaterials in Detail:Steel/ferrous metal
Wire & Cup Brushes212
![]() |
Price from £8.95
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 23mm 6mm Shank LES453161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 23mm.Wire Height: 25mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.Additional Information:• Diameter: 23mm• Type: Flat End• Wire: 0.30 Steel
![]() |
Price from £8.95
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire DIY Cup Brush 75mm 6mm Shank LES43013307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07: Wire: 0.35 Steel, Diameter: 75mm.430.126.07: Wire: 0.25 Brass, Diameter: 50mm.The Lessmann DIY Cup Brush has the following specification: Wire: 0.35 Steel.Diameter: 75mm.Max/Min: 4.500.Additional Information:• Diameter: 75mm• Wire: 0.30 Crimped Steel• Shank: 6mm
![]() |
Price from £17.49 up to £20.95
Compare prices5→Compare prices and buy Bosch Professional X-lock Heavy Inox 75x0.5x125 Mm Brush Cup Silver 260862
X-Lock Heavy For Inox Cup Brush, Knotted WireFeatures:- It Is Suitable For Use With X-Lock Angle Grinders.- X-Lock Heavy For Inox Cup Brush, Knotted Wire Provides An Aggressive Cleaning Performance- K more→notted Wire For Heavy-Duty Cleaning Applications On Medium-To-Large Surfaces- Ideal For Removing Heavy Rust, Paint Or Varnish On Stainless Steel, Aluminium And Non-Ferrous Metal Surfaces- Click It On With X-Lock – The Fastest Accessory-Changing System On The Market. - Changing Brushes Is Fast And Convenient Thanks To The Keyless X-Lock SystemFeatures:- Diameter Mm: 75- Wire Thickness Mm: 0.50- Max. Speed Rpm: 12,500- For Angle Grinders, Min. Diameter (Mm): 125- Securing: X-Lock- Material: Knotted Wi…
Price from £6.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Cup Brush 25mm 6mm Shank STA36025
Designed for use with electric drills, this Stanley crimped wire brush is ideal for removing light rust and for general surface preparation tasks on metal. Features & Benefits • Crimped steel wir more→es • Less aggressive than twist knot brushes • Suitable for various metal preparation tasks • Designed for use in a standard electric drill Specifications • Diameter: 25mm • Pack Quantity: 1
![]() |
Price from £3.16 up to £4.92
Compare prices6→Compare prices and buy Draper Wire Cup Brush, 40mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
![]() |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 50mm 6mm Shank WBS50
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) more→shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS50 Wire Cup Brush has the following specifications: Face Diameter: 50 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:• Diameter: 50mm• Wire: 0.30 Crimped Steel• Shank: 6mm
![]() |
Price from £6.95 up to £7.76
Compare prices5→Compare prices and buy Sealey Twist Knot Wire Flat Brush Ø75mm with Ø6mm Shaft
• Twist knot flat wire wheel.• Stainless steel.• Shaft: ø6mm. • Width: ø75mm.• Max Speed: 12000rpm.Twist knot flat wire wheel, ø75mm width and a ø6mm shaft.• Twist knot flat wire w more→heel. • Stainless Steel. • Shaft: ø6mm. • Width: ø75mm. • Max Speed: 12000rpm. • Model No. TKFBS75Technical Specification:Diameter: ø75mmMaximum Speed: 12000rpmNett Weight: 0.12kgShaft Diameter: ø6mmDimensions: Length: 42mm x Height: 151mmWeight: 0.142KgWarranty: Consumable
![]() |
Price from £4.00 up to £5.68
Compare prices6→Compare prices and buy Draper Hollow Cup Wire Brush, 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.