DEKO DKAG230LD20
Cutting Discs202
![]() |
DEWALT DT40260 XR Flexvolt Diamond Blade Extreme Runtime 230mm x 22mm The Dewalt DT40260 XR Runtime Blade fits the DCS690 54V XR Flexvolt Cut Off Saw. The Extreme series Wet & Dry Use Diamond Wheel bl more→ade ideal for use in Construction, Plumbing, Maintenance, Building, Roofing, Utility Contracting, Infrastructure, and Landscaping industries. The blade cuts stonework, conctrete and brick. Features: Deeper Diamond Segment height for longer life. Optimized wheel edge design for better slurry removal More run-time Optimal working at 6600rpm 22.23 x 230mm Specification: Diameter: 230mm / 9 Inch Bore Size: 22.23mm Max. rpm: 6600/min
![]() |
• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.General-purpose flat cutting disc recommended for use with Sealey and ot more→her leading makes of grinding and cutting power tools.• General purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools. • Model No. PTC/230CTechnical Specification:Bore: ø22mmDisc Size: ø230 x 3mmNett Weight: 0.28kgDimensions: Length: 3mm x Height: 230mmWeight: 0.276KgWarranty: Consumable
![]() |
Milwaukee Heavy Duty AX Carbide Demolition Reciprocating Saw Blades. Up to 50x longer life than standard Bi-Metal blades. Carbide teeth deliver long life and extreme durability in the toughest applica more→tions. Cuts through harderned screws and fastners. Up to 2x faster than standard Bi-Metal blades. A fast and aggressive 5 Tpi tooth pattern allows for the fastest cutting in nail embedded wood and a wide range of construction materials. Up to 25% more cuts per charge vs. standard Bi-Metal blades. Optimised for use with cordless reciprocating saws. Fang tip for faster plunge cutting and reaching into restricted areas. Nail guard protects the tooth during nail impacts for increased durability and …
![]() |
Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thi more→ckness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …
![]() |
Milwaukee Fang Tip Demolition Reciprocating Saw Blades. The fang tip allows for faster plunge cutting and reaching into restricted areas. Nail guard protects the tooth during nail impacts for increase more→d durability and lifetime. 1.25 mm thick blade body for good strength and blade life making it ideal for wood with nails or bolts. Aggressive 5 Tpi geometry removes more material per stroke for faster cutting. Sloped shape excellent for plunge cutting and reaching into restricted areas. Shatter resistant Bi-Metal construction allows the blade to bend and flex without breaking. Specifications • Blade Length: 230mm • Max. Cutting Capacity (Plastic Pipes): 10-175mm • Max. Cutting Capacity …
![]() |
Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.
![]() |
Measuring 230mm in diameter with a 22.23mm bore hole and 3.2mm thickness, this flat metal cutting disc is designed for versatility, stability, and longevity. Its advanced composition ensures it can ef more→fortlessly tackle a variety of metals, providing clean and accurate cuts with every pass. This 5-pack ensures a steady supply for ongoing projects, providing a cost-effective solution without compromising on quality. The flat design guarantees stability during cutting, allowing for precise control and reducing the risk of material distortion. Engineered with precision-bonded technology, this disc is optimized for efficient metal cutting, making it an indispensable tool for metal fabrication, welding,…
![]() |
Lasts up to 30x longer than a bonded cutting discCutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical smell o more→f bonded discs burning away while they cut. With the Expert Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to a shop to buy new metal discs.The Expert Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, produces no chem…
Wire & Cup Brushes212
![]() |
Price from £3.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 23mm 6mm Shank WBSI23P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Type: Pointed end Face diameter: 23/60 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm steel Conforms to ISO 9001. and DIN EN1083-1 and 2 Maximum rpm 20,000.Additional Information:• Diameter (mm): 23• End Type: Pointed End• Wire: 0.30 Steel
![]() |
Price from £4.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 50mm 6mm Shank WBSI50
This Faithfull Wire Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. It can be used in industrial power tools at higher speeds. Type: Cup more→Maximum speed: 12,000/min.The FAIWBSI50 Wire Brsh has the following specifications: Face diameter: 50 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:• Diameter (mm): 50• Wire: 0.30 Crimped Steel
![]() |
Price from £8.95
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire DIY Cup Brush 75mm 6mm Shank LES43013307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07: Wire: 0.35 Steel, Diameter: 75mm.430.126.07: Wire: 0.25 Brass, Diameter: 50mm.The Lessmann DIY Cup Brush has the following specification: Wire: 0.35 Steel.Diameter: 75mm.Max/Min: 4.500.Additional Information:• Diameter (mm): 75• Wire: 0.30 Crimped Steel
![]() |
Price from £8.95
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 23mm 6mm Shank LES453161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 23mm.Wire Height: 25mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.Additional Information:• Diameter (mm): 23• End Type: Flat End• Wire: 0.30 Steel
![]() |
Price from £5.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Inox Steel Wire Brush 50mm 6mm Shank 2608622117
The Wire Cup Brush provides a good fine surface finish. It is fitted with crimped wire for light-to-medium-duty cleaning applications such as removing coatings, rust and paint stripping. The Wire Cup more→Brush is ideal for use on small-to-medium stainless steel, aluminium and non-ferrous metal surfaces. Moreover, it is also suitable for roughing, mat sanding, texturing and cleaning formwork boards and facings. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with drills with a 6-mm shank.Wire …
![]() |
Price from £5.49
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 75mm 6mm Shank STA36005
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 75mm • Wheel Thickness: 15mm • Shank Diameter: 6mm
![]() |
Price from £5.95
Compare prices4→Compare prices and buy Makita 3 Piece Wire Brush Set D-66070
Designed for use with power tools, this set contains three types of wire brush - cup, wheel and end. All brushes have a 6mm (1/4") straight shank and can be used at a maximum RPM of 4,500. Specificati more→ons • Shank: 1/4" Straight • Pack Quantity: 3 • Max RPM: 4500 rpm Features and Benefits: • Cup type: light duty for removing coatings, rust, and cleaning • Wheel type: light duty for removing coatings, rust, and cleaning • End type: light duty for working on hard to reach areas (pipes and profiles)
![]() |
Price from £17.49
Compare prices2→Compare prices and buy Bosch Professional Heavy Inox 75x0.5x125 Mm M14 Brush Cup Silver 260862206
Heavy for Inox Wire Cup Brush provides an extra-coarse surface finish. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, prod more→ucing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with angle grinders with an M14 thread.Features:- Knotted wire for heavy-duty cleaning applications on medium to large surfaces- Ideal for removing heavy rust, paint or varnish on stainless steel, aluminium and non-ferrous metal surfaces- Fits GGS 6 and GGS 8 straight grinders with M14 thread.- Thicker wires deliver a coarser yet faster finish, thinner wires for finer resultsSpecifications:- …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.