DEKO DKAG25LD1 16002
Cutting Discs266
![]() |
Features:- For reliable cutting in general building material- Optimized diamond matrix in high quality standard for solid results
![]() |
Up to 3x more precise than a standard ceramic diamond discThe tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore crucia more→l yet difficult. The Expert HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics.Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut.The Bosch Expert …
![]() |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasive discs, with less vibration and reduced glazing. Benefitting from a longer life (30 x longer than fibre discs) and self-sharpening flaps, resulting in fewer disc changes. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces. For use with angle grinders.This Faithfull …
![]() |
The X571 Best for Metal is compatible with angle grinders. The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia al more→umina/semi-friable aluminium oxide grit is tough and wear-resistant for extensive metalwork. This product is intended for metal. The grit is bonded using fully synthetic resin for wear-resistance in heavy-duty applications on a backing material made of robust x-cloth for long-term use. The carrier plate is available in angled and straight, fibreglass and plastic versions.• Excellent Lifetime• X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal …
![]() |
Lasts up to 4x longer than a standard multi material diamond discOn modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The Expert MultiMate more→rial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer.The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity.This mix of optimum diamond grits and advanced design …
![]() |
The Multi Construction Rapido Cutting Disc provides powerful and fast cutting performance across various materials. Its special abrasive mix enables work on various materials. In addition, the thin di more→sc offers easy and fast cutting with little force exertion, less noise and minimum dust. Use this disc for cutting metal, Inox, non-ferrous metals, stone, marble and plastic. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. It is compatible with angle grinders.StraightCut virtually everything without disc changesCutting disc for metal, inox, non-ferrous metals, stone, soft tiles, marble and plastics• Powerful and Fast Cutting Performance• …
![]() |
The Standard for Abrasive Diamond Cutting Disc provides reliable cuts in all sorts of abrasive materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standard more→s, which are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting all sorts of abrasive materials. • Reliable Cuts in All Sorts of Abrasive Materials • Standard for Abrasive Diamond Cutting Disc provides reliable cuts in all sorts of abrasive materials • Optimised diamond matrix delivers solid results • High-quality standards ensured by Bosch´s diamond competence centre in Switzerland Specifications: Diameter mm: 125 Bore diameter mm: 22.2…
![]() |
• Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• More durable than normal sanding discs.• Abrasive flaps are attached to rigid disc wit more→h epoxy adhesive - does not require backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø125/22mm.Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation. More durable than normal sanding discs. Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require backing pad. Depressed centre disc suitable for electric and air tools.• Zirconium flap disc for descaling, derusting, weld preparation,…
Wire & Cup Brushes212
![]() |
Price from £2.95 up to £4.44
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Ø50mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB50Technical Specification:Diameter: ø50mmMaximum Speed: 4500rpmNett Weight: 0.05kgShaft Diameter: ø6mmDimensions: Length: 30mm x Height: 150mmWeight: 0.054KgWarranty: Consumable
![]() |
Price from £5.49
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 75mm 6mm Shank STA36005
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 75mm • Wheel Thickness: 15mm • Shank Diameter: 6mm
![]() |
Price from £4.95 up to £5.85
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 75mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø75mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 75mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø75mm. • Maximum Speed: 4500rpm. • Model No. SFBS75Technical Specification:Diameter: 75mmMaximum Speed: 4500rpmNett Weight: 0.07kgShaft Diameter: 6mmDimensions: Length: 45mm x Height: 150mmWeight: 0.09KgWarranty: Consumable
![]() |
Price from £34.95 up to £35.71
Compare prices3→Compare prices and buy Sealey Cleaning Brush Set Injector Bore 14pc
• Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting.• Set includes 3-Piece Brass Brushes 18/20/25mm.• 2-Piece End Brushes 15/19mm.• 1-Piece more→Steel Rod.• 1-Piece Rod.• 6-piece blanking plugs.Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. Set includes 3-piece brass brushes 18/20/25mm, 2-piece end brushes 15/19mm, 1-piece Steel rod, 1-piece rod and 6-piece blanking plugs.Technical Specification:Brush Size: 18, 20, 25mmBrush Type: Brass & SteelExtension Bar Length: 200mmNett Weight: 0.26kgDimensions: Length: 55mm x Height: 210mmWeight: 0.665KgWarranty: 1 year
![]() |
Price from £13.95
Compare prices3→Compare prices and buy Lessmann 0.3 Steel Wire Cup Brush 40mm 6mm Shank LES434162
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diameter.40m more→m.Width. 10mm.Wire Height. 15mm.Wire Gauge.0.30Wire Type. Steel.Max. R. P. M. 15,000Additional Information:• Diameter (mm): 40• Wire: 0.30 Crimped Steel
![]() |
Price from £4.00 up to £5.68
Compare prices6→Compare prices and buy Draper Hollow Cup Wire Brush, 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
![]() |
Price from £17.49
Compare prices2→Compare prices and buy Bosch Professional Heavy Inox 75x0.5x125 Mm M14 Brush Cup Silver 260862206
Heavy for Inox Wire Cup Brush provides an extra-coarse surface finish. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, prod more→ucing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with angle grinders with an M14 thread.Features:- Knotted wire for heavy-duty cleaning applications on medium to large surfaces- Ideal for removing heavy rust, paint or varnish on stainless steel, aluminium and non-ferrous metal surfaces- Fits GGS 6 and GGS 8 straight grinders with M14 thread.- Thicker wires deliver a coarser yet faster finish, thinner wires for finer resultsSpecifications:- …
![]() |
Price from £7.49
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Pencil Brush 10mm 6mm Shank 2608622115
The Pencil Brush provides a good coarse surface finish. Fitted with knotted wire, it is ideal for medium-duty cleaning applications on small steel surfaces. Its shape makes it ideal for cleaning work more→in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The brush is also suitable for removing heavy rust and varnish as well as stripping paint. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results It is intended for use with drills with a 6-mm shank.Pencil brush – knotted wireIdeal for wo…
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.