DEKO DKAG650W 063-2200
Cutting Discs266
![]() |
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Stone Cut Off Disc …
![]() |
Up to 3x more precise than a standard ceramic diamond discThe tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore crucia more→l yet difficult. The Expert HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics.Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut.The Bosch Expert …
![]() |
Use this disc for grinding welding seams and coarse-sanding metal surfaces. Changing flap discs is fast and convenient thanks to the keyless X-LOCK system. X-LOCK flaps discs also fit standard angle g more→rinders.• Excellent Lifetime• X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications• High-quality zirconia alumina/semi-friable aluminium oxide grit is tough and wear-resistant for extensive metalwork• Carrier plate is available in angled and straight versions, from fibreglass or plastic material • FITS ALL grinders, including standard angle grinders with nut and threadSpecifications:Disc diameter mm: 125Bore diameter mm: 22,23Grit: 80X-LOCKMaterials:Ferrous …
![]() |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasive discs, with less vibration and reduced glazing. Benefitting from a longer life (30 x longer than fibre discs) and self-sharpening flaps, resulting in fewer disc changes. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces. For use with angle grinders.This Faithfull …
![]() |
Metal Cutting Disc / Steel / Quantity 100 Piece / Disc Diameter 125 mm / Bore 22.23 mm
![]() |
The Makita Ultra Thin Metal Cutting Disc is a high quality stainless steel cutting disk with an extra thin kerf. Desiged for cutting stainless steel the disk will give a perfect cutting finish everyti more→me. Specifications: • Blade Diameter: 125mm • Bore Size: 22.23mm • Thickness: 1.2mm Features and Benefits: • Designed for cutting stainless steel / inox / aluminium - extrusions, welds, sections, trunking, pipes
![]() |
X-LOCK Mini Cordless Grinder GWX 18V-10 P, The GWX 18V-10 P Professional small cordless angle grinder with X-LOCK offers improved power and tool control for the 18 V category.Thanks to its Brushless m more→otor and ProCORE18V battery technology, it offers the same power as a 1000 W corded grinder.It includes an X-LOCK quick-change click system that allows you to change accessories quickly and comfortably.It also includes PROtection switch, KickBack Control and X-Brake, to offer maximum user protection and comfort.This tool is designed for cutting and grinding metal, stone and concrete.It is compatible with the GDE 125 EA-T Professional and GDE 115 / 125 FC-T Professional dust extraction devices and …
![]() |
Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.
Wire & Cup Brushes212
![]() |
Price from £2.95 up to £4.44
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Ø50mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB50Technical Specification:Diameter: ø50mmMaximum Speed: 4500rpmNett Weight: 0.05kgShaft Diameter: ø6mmDimensions: Length: 30mm x Height: 150mmWeight: 0.054KgWarranty: Consumable
![]() |
Price from £5.95 up to £6.09
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Brush 70mm 6mm Shank 1609200271
The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium-duty cleaning applications. It is suitable for removing coatings and rust and for cleaning f more→ormwork boards and facings. Ideal for use on steel surfaces, this brush is also suitable for roughing, mat sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with drills with a 6-mm shank.Wire cup brush – crimped wireSuitable for light to medium duty cleaning work on…
![]() |
Price from £2.29 up to £4.11
Compare prices7→Compare prices and buy Draper Rotary Wire Brush, 6 x 50mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
![]() |
Price from £5.95
Compare prices4→Compare prices and buy Makita 3 Piece Wire Brush Set D-66070
Designed for use with power tools, this set contains three types of wire brush - cup, wheel and end. All brushes have a 6mm (1/4") straight shank and can be used at a maximum RPM of 4,500. Specificati more→ons • Shank: 1/4" Straight • Pack Quantity: 3 • Max RPM: 4500 rpm Features and Benefits: • Cup type: light duty for removing coatings, rust, and cleaning • Wheel type: light duty for removing coatings, rust, and cleaning • End type: light duty for working on hard to reach areas (pipes and profiles)
![]() |
Price from £17.49
Compare prices2→Compare prices and buy Bosch Professional Heavy Inox 75x0.5x125 Mm M14 Brush Cup Silver 260862206
Heavy for Inox Wire Cup Brush provides an extra-coarse surface finish. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, prod more→ucing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with angle grinders with an M14 thread.Features:- Knotted wire for heavy-duty cleaning applications on medium to large surfaces- Ideal for removing heavy rust, paint or varnish on stainless steel, aluminium and non-ferrous metal surfaces- Fits GGS 6 and GGS 8 straight grinders with M14 thread.- Thicker wires deliver a coarser yet faster finish, thinner wires for finer resultsSpecifications:- …
![]() |
Price from £6.49
Compare prices4→Compare prices and buy Bosch 0.2mm Crimped Inox Steel Wire Pencil Brush 15mm 6mm Shank 2608622126
The Pencil Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces. Due to its shape, the pencil brush is ideal for more→cleaning work in very hard-to-reach areas on stainless steel, aluminium and non-ferrous metal surfaces as well as in corners and the inside of pipes and profiles. It is also suitable for removing rust, roughing, matt sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use …
![]() |
Price from £13.49 up to £26.95
Compare prices6→Compare prices and buy Bosch X Lock Steel Wire Cup Brush 0.5mm 75mm X-Lock 2608620727
The X-LOCK Heavy for Metal Cup Brush, Knotted Wire provides an aggressive cleaning performance. It is fitted with knotted wire for heavy-duty cleaning applications on medium-to-large steel surfaces. T more→he wire cup brush is ideal for removing heavy rust, underseal, paint or varnish. Changing brushes is fast and convenient thanks to the keyless X-LOCK system. It is suitable for use with X-LOCK angle grinders. Wire cup brush – knotted wire Suitable for heavy duty cleaning work on medium to large metal surfaces, such as removing heavy rust, underseal, paint or varnish. Appropriate for X-LOCK angle grinders • Aggressive Cleaning on Metal Surfaces • X-LOCK Heavy for Metal Cup Brush, Knotted Wi…
![]() |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 75mm 6mm Shank WBS75
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) more→shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS75 Wire Cup Brush has the following specifications: Face Diameter: 75 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:• Diameter (mm): 75• Wire: 0.30 Crimped Steel
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.