DEKO DKBL20RH03-S1

• TCT Ultra 50 core bit with FEIN thread M 18 x 6 P 1.5• Very long service life and outstanding cutting performance. Metric dimensions, cutting depth 50 mm.SpecificationsCutting depth: 50 mm more→Bore Ø: 21 mm

Maximum Precision - The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect more→centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.…

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar more→and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

• HSS Nova 75 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 75 mm. Specifications Cutting depth: 75 mm Bore Ø: 23 mm

The IRWIN® Marples® M750 Splitproof Pro Bevel Edge Chisels have a carbon-rich blade that is solid forged, hardened and tempered up to the last inch for a long working life. They have guarantee more→d splitproof handles that help to absorb harmful vibrations. The chisels have a highly durable friction grip, sturdy neck and bolster, and are honed and sharpened.1 x IRWIN® Marples® M750 Splitproof Pro Bevel Edge Chisel 25mm (1in)Additional Information:• Chisel Type: Bevel Edge• Size (mm): 25

Impact rated drill bit with 1/4" hex shank optimised for impact drivers. Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed. Quad Edge Tip unique combi more→nation of 135° split point and four cutting edges 135° split point allows for precise and fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life. Variable flute geometry for faster material ejection and helps the bit run cooler and prevent it from burning out faster. Wider core towards the shank of the drill bit strengthens the core to increase overall flute durability. Specifications • Diameter: 9mm • Total Length: …

Safety note: Please always wear protective goggles, hearing protection, a dust mask and work gloves when using these materials. Features and Benefits • Flat chisel, 20 mm wide. Targeted cutting more→action allows precise correction work in concrete as well as demolition and breakthroughs in masonry. • Spade chisel, 40 mm wide, for large-area removal of plaster and light demolition work in masonry, for breaking up and loosening earth, screed and bitumen. • High-grade steel and optimum hardening process guarantee long service life and consistent quality. Specifications Contents: 1 SDS plus pointed chisel 250 mm 1 SDS plus spade chisel 40 x 250 mm 1 SDS plus flat chisel 20 x 250 mm …

Makita 5 Piece SDS Plus Chisel Set suitable for concrete, demolition, render, chasing, tiles and channelling. Features and Benefits • Application: Concrete, demolition, render, chasing, tiles, ch more→annelling • Forged and tempered cold chisels • Aluminium case Specifications • Shank: SDS Plus • Pack Quantity: 5 Contents • Bull Point 250mm (x2) • Cold Chisel 250mm (x2) • Scaling Chisel 250mm • Aluminium Case

Flat Chisel / Hexagonal / Total Length 400 mm / Feed Opening 22 mm / Stone / 1 Piece

Makita SDS Plus shank wood chisels are ideal for fast, rough stock removal when used with rotary hammer drills. Specifications • Diameter: 20mm • Overall Length: 170mm • Shank: SDS Plus more→• Working Length: 110mm • Pack Quantity: 1 Features and Benefits • Good for quickly removing a lot and hard wood material • Suitable for Wood, woodwork, wood collections • Voice iron with SDS-plus setup

The Sds Max Pointed Chisel Delivers Standard Chiselling For Various Demolition Applications. Its Pointed Tip Makes Precise Adjustment Work In Concrete Possible. The Chisel Is Intended For Use In Concr more→ete And Brick, Including Mortising, Demolition And Adjustment Work, In Addition To Restoring Joints And Clearing Reinforcements. It Is Compatible With Sds Max Shank Systems.Specifications: - Length: 600 Mm

The Makita D-15300 features a robust 30mm hex shank that ensures a secure fit in compatible demolition hammers and breakers. This provides stability and control during heavy-duty use, ensuring efficie more→nt and precise material removal. The chisel's durable construction guarantees long-lasting performance, even in demanding demolition environments. Features & Benefits • For use on concrete • Heavy duty construction • Secure 30mm hex shank Specifications • Hex Shank: 30mm • Length: 400mm • Width: 30mm • Quantity: 1