Dnipro-M DGA-200BC Ultra + BP-240 (49134000-5)
Cutting Discs236
 |
The Turbo Viper – Tva Diamond Blade Is Recommended For Dry Cutting Of Hard Materials Such Asgranite, Rustic Tiles, Klinker, Refractories, Slate And, Of Course, Porcelain Tiles. The Specific Design Of more→The Diamond Rim Of The Tva Diamond Blade By Rubi Offers Faster Cutting Speed In The Hardest Materials Without Sacrificing The Quality Of The Finish.Features
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Reliable Cuts - The X-LOCK Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's more→high-quality standards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. X-LOCK cutting discs also fit standard angle grinders. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º the most efficient results are achieved. For use with a variety of machines mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …
 |
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge and the plate is fully hardened more→for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 125mm.Bore: 20mm.Teeth: 16.Kerf Thickness: 2.5mm.Tooth Config: ATB.PTDIRW18970
 |
X-Lock Best For Ceramic Extraclea N Turbo 125 X 22.23 X 1.4 X 7Mm
 |
Fast Powerful Cutting - The Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, wh more→ich copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
 |
Cuts materials that angle grinders previously couldn’t
Extreme durability is built in with Bosch Carbide Technology.
Click it on with X-LOCK – the fastest accessory-chang
Ideal for cutting multiple materials with an angle grinder. Cuts wood and embedded screws and nails. plastic pipes. and makes accurate cut-outs in tough panels such as laminates and drywall.
Scope of delivery: 1 x Bosch Expert Carbide Multi Wheel X-LOCK Cutting Disc 125 mm, 1 mm, 22.23 mm
Extreme durability is built in with Bosch Carbide Technology.
Click it on with X-LOCK – the fastest accessory-chang
Ideal for cutting multiple materials with an angle grinder. Cuts wood and embedded screws and nails. plastic pipes. and makes accurate cut-outs in tough panels such as laminates and drywall.
Scope of delivery: 1 x Bosch Expert Carbide Multi Wheel X-LOCK Cutting Disc 125 mm, 1 mm, 22.23 mm
Wire & Cup Brushes310
 |
Price from £10.62 up to £13.95
Compare prices6→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set set 1 07436 (6 Piece)
This Set Of Wire Brushes Is Designed For Light To Medium-Duty Work And Delivers Rapid Stock Removal From A Wide Variety Of Surfaces. The Brushes Are Made From Hardened Dipped Brassed Steel Wire Which more→Gives A High Level Of Durability And Resistance To Oxidation. The Brushes Are Strong Enough To Provide Reliable Performance And The Crimping Is Flexible To Tackle Recessed Areas And Irregular Surfaces. The Set Includes A 25Mm Wire End Brush 75Mm Wire Cup Brush And Three Wire Wheel Brushes (50 75 100Mm). Fitted With A Non-Slip 6.35Mm Hex Shank. Compatible With Most Drill Drivers And Drills With A 13Mm Chuck.PTDDRPDIR
 |
Price from £19.25 up to £21.95
Compare prices5→Compare prices and buy Lessmann 471.254 Conical Knot Brush 100Mm M10 Bore 0.50 Steel Wire LES471254
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed more→for heavy-duty use for the preparing of metal surfaces before painting and the removal of slag rust scale or concrete waste.Diameter. 100mm.Width. 10mm.Bore. M10.Wire Gauge.0.50.Wire Type. Steel.Max R.P.M. 12 500.PTDLES47125
 |
Price from £16.76 up to £18.95
Compare prices5→Compare prices and buy Lessmann 423.164 Cup Brush 75Mm M10 0.35 Steel Wire LES423164
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust paint dirt or scale and for polishing. A range of si more→zes and wire styles are available.Diame
 |
Price from £24.49 up to £34.95
Compare prices6→Compare prices and buy Bosch Pt Clean Metal 100x0.5x180 Mm M14 Brush Cup 1608614011
Clean For Metal Wire Cup Brush Provides An Extra-Fine Surface Finish. Brush Wires Are Available In Different Thicknesses For Variable Levels Of Abrasive Needs. Thicker Wires Are More Aggressive, Produ more→cing A Coarser Yet Faster Surface Finish, While Thinner Wires Deliver Finer, Smoother Surface Results. It Is Intended For Use With Angle Grinders With An M14 Thread.Features
 |
Price from £37.19 up to £40.95
Compare prices5→Compare prices and buy Lessmann 483.81X X-Lock Stainless Steel Knot Cup Brush 85Mm Non Spark LES48381X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting they can be used for polishing light deburring work and removing rust paint dir more→t and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses car workshops and by staircase railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Stainless Steel Knot Cup Brush 85mm Non SparkPTDLES4838
 |
Price from £12.82 up to £20.99
Compare prices6→Compare prices and buy Faithfull Wire Cup Brush T/Knot 100X M14X2 0,50Mm, Multi FAIWBT100
Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for industria more→l use and more specialist applications. Features: For heavier duty applications For use with angle grinders For use with angle grinders Specifications: Dimensions: H:13.3 x W:8.0 x D:11.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBT100
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Brush 50mm 6mm Shank 2608622006
Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £11.41 up to £13.95
Compare prices5→Compare prices and buy Lessmann 434.162 Cup Brush With Shank D40Mm X H15Mm 0.30 Steel Wire LES434162
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust paint dirt or scale and for polishing.Diame
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
