Dnipro-M ER-210LX (8635000)
Diamond Core Bits & Milling Cutters2764
 |
Alternative bearing B127A removes the lower quirk. Specifications • Shank Diameter: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64.5 • B more→earing Dia Metric: 9.5 • Radius 1 Metric: 4 • Radius 2 Metric: 4
 |
These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, with two flutes. Specifications • Shank Diameter: 1/4 • Dia Metric: 4.8 • Dia Imper more→ial: 3/16 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 66 • Radius 1 Metric: 2.4 • Radius 1 Imperial: 3/32
 |
The two bearings supplied offer the means of cutting different depths of mouldings. Specifications • Shank Diameter: 1/2 • Dia Metric: 34.9 • Cut Length Metric: 16 • Overall Lengt more→h Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 12.7
 |
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Metric: 3.2 • Cut Length Imperial: 1/8 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Sawbore: 6.35 • Sawbore Imperial: 1/4
 |
For coves and part of a rule joint. Specifications • Shank Diameter: 1/2 • Dia Metric: 16 • Cut Length Metric: 19.5 • Overall Length Metric: 57.5 • Radius 1 Metric: 8
 |
The Trend SET/SS31X1/4TC Router Cutter Set contains a range of popular tungsten carbide tipped cutters for a variety of applications. Suitable for softwood hardwood chipboard plywood and MDF. Suppl more→ied in an aluminium carry case. Contains: 9 x Non-bearing Straight Cutters: 5 x 12mm 6 x 20mm 8 x 20mm 10 x 20mm 12 x 20mm 14 x 20mm 16 x 20mm 18 x 20mm and 20 x 20mm 2 x Non-bearing Core Box Cutters: R3.2mm and R6.35mm 2 x Non-bearing 45° V-Groove Cutters: 9.5mm and 12.7mm 1 x Non-bearing Dovetail Cutter 9.5mm/13mm 1 x Non-bearing Classic Panel Cutter 12.7mm 4 x Guided Round Over Cutters: R3.2mm R6.3mm R7.9mm and R9.5mm 4 x Guided Ovolo Cutters: R3.2mm R6.3mm R7.9mm and …
 |
Cuts out apertures in laminate worktops. The nose of the cutter acts as a guide follower. Specifications • Shank Diameter: 8 mm • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Lengt more→h Metric: 18 • Cut Length Imperial: 45/64 • Overall Length Metric: 77
 |
The Dormer G136 HSS 90° Countersink is designed to provide precise and efficient cutting for countersunk-hea
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
