Dnipro-M GL-115S (80987000)
Cutting Discs264
 |
Up to 3x more precise than a standard ceramic diamond discThe tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore crucia more→l yet difficult. The Expert HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics.Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut.The Bosch Expert …
 |
Cuts materials that angle grinders previously couldn’tProfess
 |
Cuts materials that angle grinders previously couldn’tProfess
 |
The Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standards. Bosch's diamond comp more→etence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting concrete. Pack of 1 • Reliable Cuts in Concrete • Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete • Optimised diamond matrix delivers solid results thanks to the disc's high-quality standards • Bosch´s diamond competence centre in Switzerland ensures consistent quality Specifications: Diameter mm: 125 Bore diameter mm: 2…
 |
Makita's B-38560 Anti-Vibration Offset Diamond Wheel features 2 small shock absorbers within the flange system. These work to absorb vibration, limiting transferred vibration to machine and end user. more→The rubber rings also reduce tapping, allowing for smooth and efficient grinding. Not compatible with the PC5000. Features & Benefits • Low vibration • Less tapping • Segmented Diamond • High efficiency Specifications • Application: Dry grinding with concrete/granit
 |
continuous diamond saw 1a1r 125x1,2x22,23 dct. for ceramic tiles, ceramic stones, etc. tyrolitSpecifications:- Weight: 0,1520 KG
 |
Lasts up to 4x longer than a standard multi material diamond discOn modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The Expert MultiMate more→rial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer.The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity.This mix of optimum diamond grits and advanced design …
 |
Bevels tubes as they cut and lasts longer than conventional cutting wheels.Features
Wire & Cup Brushes214
 |
Price from £11.81 up to £12.95
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (6 Piece)
• Set includes a 25mm wire end brush, 75mm wire cup brush, and three wire wheel brushes (50, 75, 100mm) • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of more→surfaces • Hardened dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance&hell
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Brush 50mm 6mm Shank 2608622022
The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £5.95
Compare prices4→Compare prices and buy Makita 3 Piece Wire Brush Set D-66070
Designed for use with power tools, this set contains three types of wire brush - cup, wheel and end. All brushes have a 6mm (1/4") straight shank and can be used at a maximum RPM of 4,500. Specificati more→ons • Shank: 1/4" Straight • Pack Quantity: 3 • Max RPM: 4500 rpmFeatures & Benefits• Cup type: light duty for removing coatings, rust, and cleaning • Wheel type: light duty for removing coatings, rust, and cleaning • End type: light duty for working on hard to reach areas (pipes and profiles)
 |
Price from £3.49 up to £4.25
Compare prices5→Compare prices and buy Sealey Flat Top Decarbonising Brush 13mm
• Flat trimmed brush with brassed and crimped filaments for extra rigidity.• ø6 x 20mm Shaft.• Trim Length/ø: 20/13mm.Flat trimmed brush with brassed and crimped filaments for extra rigidity more→. ø6 x 20mm Shaft.• Flat trimmed brush with brassed and crimped filaments for extra rigidity. • ø6 x 20mm Shaft. • Trim Length/ø: 20/13mm. • Model No. VS1802Technical Specification:N
 |
Price from £5.58 up to £5.95
Compare prices3→Compare prices and buy Sealey Decarbonising Brush Set 2pc
• Brassed and crimped steel brushes with flat and pointed fill. Suitable for decarbonising cylinder head ports and components.• Shank ø: 6mm.Brassed and crimped steel brushes with flat and pointe more→d fill. Suitable for decarbonising cylinder head ports and components.• Brassed and crimped steel brushes with flat and pointed fill. • Suitable for decarbonising cylinder head ports and components. • Shank Diameter: ø6mm. • Model No. VS1801Technical Specification:N
 |
Price from £8.95
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire DIY Cup Brush 75mm 6mm Shank LES43013307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07
 |
Price from £2.95 up to £4.44
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Ø50mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB50Technical Specification:D
 |
Price from £48.95
Compare prices3→Compare prices and buy Faithfull 36 Piece Assorted Wire Brush Set FAIWBA36
A selection of wire wheels of assorted sizes and shapes, with 1/4 inch shanks to suit most mains and cordless drills. They are ideal for preparing metal surfaces prior to painting, rust removal, decar more→bonising motor engines and cleaning of garden and contractors tools. 36 pieces. 18 x 50mm Cup Brushes. 6 x 50mm Circular Brushes. 6 x 65mm Circular Brushes. 6 x 75mm Circular Brushes. Although the wheels are supplied in a bulk of 20, your Faithfull stockist may be able to supply any individual wheel to the purchasers choice. Not suitable for use in die grinders or high speed air tools.Additiona
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
