Draper Expert 55953 (XP20AG115)
Cutting Discs291
 |
Flexovit Flap Discs are ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The angles of the flaps mean more abrasive makes contact with the workpiece than a more→conventional fibre disc which increases productivity. Suitable for use on Metal, wood and paint.Size: 115mm Bore: 22mmGrit: 80Additional Information:&bu
 |
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …
 |
• Aluminium oxide, depressed centre disc for electric and air tools.• Suitable for metal grinding applications.• Pack of 5.Aluminium oxide, depressed centre disc for electric and air tools. Suitable f more→or metal grinding applications. Pack of 5.• Aluminium oxide, depressed centre disc for electric and air tools. • Suitable for metal grinding applications. • Pack of 5. • Model No. PTC/115G5Techni
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock diamond cutting discs are suitable for cutting concrete, granite and marble. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in seconds …
 |
Bosch 2608602201 Standard For Ceramic Diamond Cutting Disc 115mmThe Bosch 2608602201 Diamond Cutting Disc is designed for use on ceramic and tile. You can expect exact accurate cutting results in all more→types of tile thanks to its continuous cutting rim.Features:
- To be used with an angle grinder
- This diamond cutting disc is suitable for cutting ceramics, porcelain, tile and fine stonewareSpecif
- Diameter: 115mm
- Cutting width: 1.6mm
- To be used with an angle grinder
- This diamond cutting disc is suitable for cutting ceramics, porcelain, tile and fine stonewareSpecif
- Diameter: 115mm
- Cutting width: 1.6mm
 |
Extra-Clean Cuts in Porcelain - The Best for Ceramic Extra Clean Turbo Diamond Cutting Disc provides extra-clean cuts in porcelain. Its turbo rim is designed to achieve neat results in all kinds of ha more→rd ceramics, while the optimised diamond matrix delivers chip-free cuts. Use this disc for cutting ceramic, porcelain and fine stoneware. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Clean Cuts in Porcelain • Best for Ceramic Extra Clean Turbo Diamond Cutting Disc provides extra-clean cuts in porcelain • Turbo rim for neat results in all kinds of hard ceramics Specifications Diameter: 115mm Bore diameter: …
 |
Cuts materials that angle grinders previously couldn’t - Professionals value angle grinders for their ability to cut tough materials like concrete, stone and metal. With the EXPERT Carbide Multi Wheel more→this wonderful tool can be even more versatile, efficiently cutting all kinds of softer materials such as wood, plastic and modern composites. The EXPERT Carbide Multi Wheel uses sharp carbide grits on its rim to cut multiple materials extremely effectively. The grits are joined to a steel body by a laser technique for an extra strong bond, giving a safe and reliable cutting disc that maintains a constant speed and depth throughout a long lifespan. With the EXPERT Carbide Multi Wheel, your angle gr…
 |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø115/22mm.
Wire & Cup Brushes208
 |
Price from £10.95 up to £13.46
Compare prices6→Compare prices and buy Sealey Twist Knot Wire Cup Brush Ø100mm M14 x 2mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
 |
Price from £4.91 up to £5.36
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 75mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø75mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 75mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø75mm. • Maximum Speed: 4500rpm. • Model No. SFBS75Technical Specification:D
 |
Price from £12.19 up to £13.95
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (6 Piece)
• Set includes a 25mm wire end brush, 75mm wire cup brush, and three wire wheel brushes (50, 75, 100mm) • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of more→surfaces • Hardened dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance&hell
 |
Price from £6.49 up to £6.59
Compare prices4→Compare prices and buy Lessmann 0.35 Steel Wire DIY Cup Brush 50mm 6mm Shank LES43012307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07
 |
Price from £5.49
Compare prices4→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Wheel Brush 75mm 6mm Shank 2608622007
Fine Finish on Steel - The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealin more→g colour on welded seams. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. It is intended for use with drills with 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother …
 |
Price from £7.49 up to £11.99
Compare prices5→Compare prices and buy Faithfull Conical Wire Brush 100Mm X M14X2 0,5Mm FAIWBTC100
Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement. Max. Cutting Speed more→: 12,500 rpm. Features: For use on s/less steel & heavier duty applications For use with angle grinders For use with angle grinders Maximum speed: 12,500 rpm Specifications: Dimensions: H:13.0 x W:4.0 x D:10.5 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBTC100
 |
Price from £14.95 up to £19.99
Compare prices5→Compare prices and buy Faithfull Wire Cup Brush Knot 75Mm Xlock FAIWBT75XL
X-LOCK Twist Knot Wire Brush for heavy-duty applications. Ideal for removing rust, paint and varnish from steel surfaces. The X-LOCK quick change system ensures a fast, reliable and effective one clic more→k change between tools when used with a compatible angle grinder. Features: Use on steel X-LOCK quick change system for fast change between tools X-LOCK quick change system for fast change between tools 0.5mm twist knot steel wire Specifications: Dimensions: H:11.5 x W:6.0 x D:9.5 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBT75XL
 |
Price from £6.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 100mm 6mm Shank STA36010
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 100mm • Wheel Thickness: 12mm • Shank Diameter: 6m
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
