DWT KF 06-30 (748663)
Diamond Core Bits & Milling Cutters2176
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 4.8 • Dia Imperial: 3/16 • Cut Length Metric: 11.1 • Cut Length Imperial: 7/16 • Overall Length Metric: 56
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 8 • Dia Metric: 8 • Dia Imperial: 5/16 • Cut Length Metric: 19 • Overall Length Metric: 57
 |
Produces an elegant edge mould, or a shallow panel effect when routing on its full width. Specifications • Shank Diameter: 1/2 • Dia Metric: 20 • Cut Length Metric: 15 • Overall L more→ength Metric: 53 • Radius 1 Metric: 6
 |
Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Specifications • Shank Diameter: more→1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 65.5
 |
Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. A 2mm maximum overlap should be left before trimming. Specifications &bu more→ll; Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 51 • Cut Length Imperial: 2 • Overall Length Metric: 116 • Bearing Dia Metric: 12.7 • Angle: 90
 |
104.95Buy!
£
£
Mytoolshed.co.uk
Delivery: in United Kingdom
Report
Solid Carbide replaceable blades. Tool body remains in place when changing blades, thus reducing down-time. Straight cutters have blades with two or four cutting edges, allowing them to be rotated more→and locked in identical positions. 1/2 inch shank tools are ideal for use in production applications. Clear economical advantage over conventional brazed tip tooling. The single blade can be rotated 180 degrees to give double the life of a conventional tool. Ideally suited for use with Trend Combi worktop jigs. Suitable for plunge cutting. Use on chipboard only. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 49.5 …
 |
Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications • Shank Diameter: 1/2 • Dia Metric: 60 • Cut Length Metric: 27 • Overall Length Metric: 65 more→.1 • Radius 1 Metric: 20
 |
Makita Replacement 4 Way Countersink and Drill Bit. Drill Bit No.10 (M5) for Adapter D-73221. Specifications • Diameter: 3.2 mm • Pack Quantity: 1
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
