DWT WS 07-115 E (745648)
Cutting Discs360
 |
Blue Spot Sanding Flap Discs are made from aluminium oxide and are suitable for most angle grinders. Diameter: 115mm.Bore: 22.2mm.Maximum speed: 80m/s.Grade: 60 Grit.Additional Information:&bu
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …
 |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø115/22mm.
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
• Zirconium flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• More durable than normal sanding discs.• Abrasive flaps are attached to rigid disc wi more→th epoxy adhesive - does not require backing pad.• Depressed centre discs suitable for electric and air tools.Technical SpecificationBo
 |
Part of the KWB by Einhell accessory range, these diamond blades are suitable for cutting hard materials such as stone, ceramics, concrete and tiles. They are designed for improved efficiency with cor more→dless machines, enabling you to complete more cuts per battery charge. Features and Benefits • Diamond blade for angle grinders • Compatible with 115mm angle grinders from Einhell and most other standard 115mm angle grinders • Continuous rim: suitable for clean cuts in tiles • Optimised for energy saving use in cordless tools - helps to prolong runtime Specifications • Diameter: 115mm • Bore: 22.23mm • Thickness: 1.2mm • Quantity: 1
 |
49.49Buy!
£
£
BricoINN
Delivery: in United Kingdom
Report
This cordless Dual Power angle grinder has a small diameter disc which makes it a practical, manoeuvrable and versatile tool. The battery and charger are not included. They are sold separately and are more→compatible with the entire Dual Power range.Its strong points:- Manoeuvrable: Thanks to its compact size, this angle grinder is easily manoeuvrable and can be used to grind or deburr small surfaces.Effici
Wire & Cup Brushes322
 |
Price from £29.95 up to £35.69
Compare prices6→Compare prices and buy Draper Expert Twist Knot Wire Cup Brush, 80mm, M14
Expert Quality, industrial quality manufactured from 0.5mm hardened steel wire. Designed for use with angle grinders. Carton packed.
 |
Price from £1.89 up to £2.49
Compare prices5→Compare prices and buy BlueSpot Flat Crimped Steel Wire Wheel Brush 75mm 6mm Shank
The BlueSpot Tools Flat Wire Wheel Brush is ideal for preparing metal surfaces for welding and painting. Its 6mm (1/4in) shank fits most electric drills.This BlueSpot Tools Flat Steel Wire Wheel Brush more→has the following specifications: Shank: 6mm (1/4in).Wire: 0.3mm.Diameter: 75mm.Max. Safe Speed: 4,500 RPM.Additional Information:&bu
 |
Price from £47.95
Compare prices3→Compare prices and buy Lessmann X Lock Non Sparking Stainless Steel Knotted Wire Wheel 125mm X-Lock
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Stainless Steel Knot Wheel Brush 125mm Non Spark
 |
Price from £20.99 up to £28.95
Compare prices6→Compare prices and buy Bosch 0.5mm Knotted Steel Wire Cup Brush 90mm M14 Thread
Extra-Coarse Finish - The Heavy for Metal Wire Cup Brush provides an extra-coarse surface finish. This cup brush is fitted with knotted wire for heavy-duty cleaning applications. Ideal for use in meta more→l, it is suitable for cleaning work on medium to large steel surfaces, such as removing heavy rust, underseal, paint or varnish. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Fits GGS 6 and GGS 8 straight grinders with M14 thread. Features and Benefits …
 |
Price from £2.95 up to £3.58
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Ø50mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB50Technical Specification:D
 |
Price from £5.95
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 75mm M14 Thread
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indust more→rial use and more specialist applications.Wi
 |
Price from £7.49
Compare prices3→Compare prices and buy Faithfull Twisted Knot Wire Wheel Brush 100mm M10 Thread
Faithfull Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement. Max. Cut more→ting Speed: 12,500 rpm.Type: Knot conical Diameter: 100 mm Thread: M10 x 1.5 Wire: 0.5 mm twist knot steel Conforms to ISO 9001. and DIN EN1083-1 and 2Additional Information:&bu
 |
Price from £30.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Conical Knot Brush 115mm M14 Thread
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed more→for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.Diameter. 115mm.Width.10m
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
