Edon CF-1405

The Irwin Metric TCT (Tungsten Carbide Tipped) Drill Bits offer precision drilling with stationary machines in hardened steel, cast iron, bronze alloys and manganese alloyed steel. The C2 Carbide Tip more→will drill hardened material up to a hardness of 50 Rockwell C and is four facetted ground for low drilling pressure and perfect centring. The body of the drill bit is made from Chrome Vanadium Steel, hardened to 56 Rockwell C. A coolant should always be used when drilling with TCT twist drill bits. Irwin suggest the use of a 3- 6% emulsion. The coolant will extend the lifetime of the drill bit.Irwin HSS TCT tip drill bit. Specifications:Diameter: 9.5mm.Total length: 125mm.Working Length: 81mm.Additional …

The Bosch 2608596808 HSS-G Metal Drill Bits for active cutting and perfect centring without wandering The Bosch 2608596808 is a pack of 5 same size Drill Bits with 1.5mm diameter, a working depth of 4 more→5mm and an overall length of 70mm. The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground …

The SDS max-9 Speed Clean Drill Bit is available as a 4-cutter for bigger diameters and as a 2-cutter for smaller diameters and features an Activeteq centring tip. To achieve accurate results, the vis more→ibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. It is made in Germany. It is compatible with rotary hammers with SDS max shanks and works in combination with industrial M-class vacuum cleaners. The SDS max-9 Speed Clean Drill Bit allows for dustless drilling. While working, the built-in vacuum attachment pulls dust through extraction holes in the drill bit, allowing optimum material removal without additional steps. This technology results …