Energomash UShM-90111
Cutting Discs240
 |
The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. Bosch cutting discs comply with the m more→aximum safety requirements, such as EN 12413. It is compatible with angle grinders.Straig
 |
continuous diamond saw 1a1r 125x1,2x22,23 dct. for ceramic tiles, ceramic stones, etc. tyrolitSpecifications:- Weight: 0,1520 KG
 |
Faithfull Abrasive Jumbo Flap Discs contain up to 40% more abrasive than standard flap discs, providing a considerably longer working life. Manufactured from long lasting Zirconia Alumina. Resin bonde more→d for extra strength and durability. Designed for use with most angle grinders of the corresponding size. Ideal for use on wood, metal, plastic and stainless steel.Diam Size 127mmGrade Coarse 40 GritBore. 22.23mmAddition
 |
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
Designed for use with angle grinders, these Stanley grinding discs have a depressed centre so the edge of the disc is offset from the nut - this allows for better access in tight spaces. Features & Be more→nefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 125mm • Bore: 22mm • Thickness: 6mm • Pack Quantity: 1
 |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
 |
Expert Diamond Pipe Cut Wheel For Longest Life Cutting & Chamfering Pipes:- There are many ways to cut and chamfer pipes, but most are time consuming and involve specialized equipment: with the EXPERT more→Diamond Pipe Cut Wheel you can get a perfect chamfered cut from your angle grinder – and this is a highly durable accessory to boot.- The perfect accessory for pipe cutting, it doesn't shatter if dropped, produces no chemical smell or extra dust during cutting, and maintains a constant cutting depth and speed throughout its long life.Specificat
 |
A27 series Pro Metal grinding discs for angle grinders. Specifications • Diameter: 125mm • Quantity: 1
Wire & Cup Brushes211
 |
Price from £9.95 up to £13.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Brass Coated Wire Cup Brush 70mm M14 Thread 1608614020
The Clean for Metal Wire Cup Brush delivers an extra-fine surface finish. The wire cup brush is fitted with brass-coated crimped wire for light- to medium-duty cleaning applications. It is suitable fo more→r removing coatings, rust and paint stripping on medium to large metal and non-ferrous metal surfaces. This wire cup brush is also suitable for roughing, matt sanding, cleaning formwork boards and facings. The brass-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface …
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Brush 50mm 6mm Shank 2608622022
The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £3.49
Compare prices4→Compare prices and buy Sealey Flat Top Brassed Decarbonising Brush 24mm 6mm Shank VS1803
Flat trimmed brush with brassed and crimped filaments for extra rigidity. Ø6 x 26mm Shaft. Features & Benefits: • Flat trimmed brush with brassed and crimped filaments for extra rigidity. • Ø6 x 26mm more→Shaft. • Trim Length/Diameter
 |
Price from £2.33 up to £2.95
Compare prices5→Compare prices and buy Draper Brassed Wire Wheel Brush 50mm 6mm Shank 41427
This wire wheel brush is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire, which g more→ives a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The wheel shape is designed to work perpendicular to the surface, making it ideal for smaller and tighter areas. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck. Conforms to EN1083-1 and EN1083-2 Contents: 1 x Brassed Steel Crimped Wire Wheel …
 |
Price from £2.95
Compare prices4→Compare prices and buy Sealey Flat Wire Brush 50mm 6mm Shank SFB50
Suitable for use with power drills. Ø6mm Shaft. Crimped brassed steel filaments add extra rigidity and cleaning power. Features & Benefits: • Suitable for use with power drills. Ø6mm Shaft. • Crimped more→brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB50 Specifications: Model No SFB50 Brand: Sealey Diameter: Ø50mm Maximum Speed: 4500rpm Nett Weight: 0.055kg Shaft Diameter: Ø6mm
 |
Price from £3.22 up to £3.95
Compare prices5→Compare prices and buy Draper Brassed Steel Wire Cup Brush 40mm 6mm Shank
This wire cup brush is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire, which giv more→es a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The cup shape works flat to the surface to cover a large surface area. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck. Conforms to EN1083-1 and EN1083-2 Contents: 1 x Brassed Steel Crimped Wire Cup Brush, 40mm Specifications: Diameter: 40mm …
 |
Price from £3.00 up to £3.49
Compare prices5→Compare prices and buy Draper Flat Top Decarbonising Wire Brush 26mm 6mm Shank 41438
This wire end brush is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire, which giv more→es a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. Its size makes it highly suitable for smaller areas that might otherwise be hard to reach, such as removing rust from water pipes. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck. Conforms to EN1083-1 and EN1083-2 Contents: 1 x Brassed Steel Crimped …
 |
47.95Buy!
£
£
Tooled-up.com
Delivery: to United Kingdom
Report
Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. Set includes brass, steel and nylon brushes Ø8-19mm, Soft grip handle and one-piece 150m more→m extension. Supplied in storage case. Features & Benefits: • Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. • 38-Piece set includes brass, steel and nylon brushes Ø8-19mm. • Soft grip handle. • One-Piece 150mm Extension. • Supplied in storage case. • Model No. VS1910
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
