Evolution R185CCSX+ (027-0003A)

Designed to fit both Makita and other manufacturer’s saws, tip embedded or “Deep Tooth” blades are especially tough and hard wearing. Easily copes with knotty wood and will slice through nail and scre more→w embedded timber without damaging teeth. Suitable for reclaimed timber and demolition work. Specifications • Bore: 15.88mm • Diameter: 185mm • Kerf: 2.0mm • Rake: 25° • Thickness: 1.25mm • Tooth Count: 16 • Material Type: Wood/Nails • Machine Type: Portable saw Features and Benefits • Nail and Knot Cutting • Extremely tough and hard wearing • Extended service life and productivity

A comprehensive selection of circular saw blades for all makes and models of portable circular saw.A wide range of sizes from 140mm - 355mm and tooth counts from 10 to 60, the range covers application more→s from coarse rip and cross cutting to extra fine cross cutting.Features:- Fully hardened and tensioned blades absorb impact and remain flat and true- High grade tungsten carbide with low wear rate for extended blade life- Precision honed for a sharper longer lasting edge- Thin kerf for less waste and reduced feed pressureSpecifications:Bore (B) - 15.8 mmDiameter (D) - 185 mmKerf (K) - 2.4 mmRake (R) - 20 ºThickness (T) - 1.2 mmTooth Count - 16Material Type - Wood

Tct Blades Abt Style Cut With 20/24/40 Teeth Bore 30Mm Bushes30X25.4Mm, 30 X 20Mm & 30 X 16Mm

This 185mm diameter blade with 60T (teeth) and 25.4mm bore delivers fine finish cutting for precision woodworking. The high 60-tooth count produces smooth, clean cuts with minimal tear-out on hardwood more→, softwood, MDF, chipboard and plywood, making it ideal for finished carpentry and joinery work. Tungsten Carbide-Tipped teeth are hardened and tempered. Compatible with most 185mm circular saws with 25.4mm, 20mm and 16mm bore sizes, including Draper Stock No. 55588, 56791 and 56786. EN847-1 Standard. Features and Benefits: • 185mm diameter with 60T for superior finish • 25.4mm bore (compatible with 20mm and 16mm adaptors) • Precision-ground carbide teeth for smooth cutting • …

Construction saw blades are suitable for first fix application where cut finish is less important and re-used timbers are often used. Teeth on these blades are designed to resist damage should they im more→pact foreign objects such as embedded nails and concrete. Please note Generic image shown for illustration purposes only. Specifications will vary depending on blade type. Features & Benefits • Extremely robust, solid construction site sheets for the toughest requirements • Designed for rapid cutting of natural woods and composites, as well as framework • Ideal for simples to good transverse and longitudinal cutting results • Ribbed heat vents allow blade to run cooler, reducing …

The Bluespot 3 Piece Circular Saw Blade Set offers a versatile selection of 184mm TCT blades suited to a wide range of cutting tasks in timber and sheet materials. Each blade is manufactured from carb more→on steel with carbide tipped teeth and a 15° positive rake angle, delivering clean, accurate cuts across hardwood, softwood, chipboard, and other composite materials. The three tooth counts — 20T, 24T, and 40T — allow the user to select the most appropriate blade for the material and finish required. The 30mm bore fits many popular circular saw models, and three reducing rings (25mm, 20mm, and 16mm) are included to broaden compatibility across a range of saw arbour sizes. This makes the set a pra…