Fein WSG 7-115 72219760120
Cutting Discs333
 |
Lasts up to 50x longer than a Bi-Metal blade in tough materials - Cutting thin sheet metal and thin wall pipes is a tough job, but with a good recip saw blade you can manage: the real problems start w more→hen you cut stainless steel. This tough, high-alloy steel is an obstacle to construction or renovation workers and destroys blades. Bosch Carbide Technology consigns these problems to the past. The EXPERT ‘Thin Tough Metal’ is a leap forward in recip saw blade development, where the hardest metal is integrated into a tooth design optimised for steel sheets and pipes. The teeth are ground to a fine geometry that allows even thin sheets of stainless steel to be cut smoothly. Ideal for metal workers, plu…
 |
• Aluminium oxide flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not requir more→e backing pad.• Depressed centre discs suitable for electric and air tools.Technical SpecificationBo
 |
These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 115mm • Thickness: 1.2mm • Bore: 22.23mm Contents • 10 Discs
 |
• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.• Suitable for cutting stainless steel.General-p
 |
Blue Spot Sanding Flap Discs are made from aluminium oxide and are suitable for most angle grinders. Diameter: 115mm.Bore: 22.2mm.Maximum speed: 80m/s.Grade: 120 Grit.Additional Information:&bu
 |
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs the more→y also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Si
 |
Excellent Lifetime - The X581 Best for Inox delivers an excellent performance lifetime on Inox surfaces. It features a cooling aid additive particularly suited for a long lifetime when working on Inox more→. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough applications. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a brilliant removal rate and lifetime. It is intended for deburring, welding preparation and blending on stainless steel (Inox), carbon steel, mild steel, aluminium, titanium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The …
 |
A pack of ten inox metal cutting discs made from premium quality resin-bonded aluminium oxide. The discs are ultra-thin for rapid cutting and the reinforced fibreglass construction improves the streng more→th and performance of the disc. Suitable for fast cutting of stainless steel, steel, structural steel and sheet metal. Compatible with 115mm angle grinders with 22.23mm bore. Supplied as a set of ten discs in a storage tin.
Wire & Cup Brushes319
 |
Price from £5.69 up to £7.28
Compare prices6→Compare prices and buy Draper Crimped Wire Cup Brush, 60mm, M14
Manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. M14 thread. Display packed.
 |
Price from £3.89 up to £5.53
Compare prices6→Compare prices and buy Draper Rotary Wire Brush, 6 x 100m
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £3.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 23mm 6mm Shank WBSI23P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Type: Pointed end Face diameter: 23/60 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm steel Conforms to ISO 9001. and DIN EN1083-1 and 2 Maximum rpm 20,000.Addition
 |
Price from £4.49 up to £6.29
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Ø100mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB100Technical Specification:D
 |
Price from £14.95
Compare prices4→Compare prices and buy Bosch X Lock Crimped Steel Wire Cup Brush 75mm X-Lock 2608620725
Extra-Fine Surface Finish on Metal - The X-LOCK Clean for Metal Cup Brush, Crimped Wire provides an extra-fine surface finish. Fitted with crimped wire for light-to-medium
 |
Price from £5.49 up to £6.71
Compare prices5→Compare prices and buy Sealey Brassed Steel Cup Brush Ø75mm M10 x 1.5mm
• Suitable for use with power tools up to the maximum rated rpm.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. C more→rimped brassed steel filaments add extra rigidity and cleaning power.• Suitable for use with power tools up to the maximum rated rpm. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. CBC75Technical Specification:D
 |
Price from £6.78 up to £8.23
Compare prices6→Compare prices and buy Sealey Twist Knot Wire Cup Brush Ø65mm M10 x 1.25mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
 |
Price from £13.95
Compare prices4→Compare prices and buy Stanley Twist Knot Wire Cup Brush 70mm M14 Thread STA36080
Fitted with an M14 thread for connection to angle grinders, this twist knot steel wire cup brush is ideal for aggressive paint and rust removal or general suface preparation work on metal and stone su more→rfaces. Stanley cup brushes have an internal holding plate for improved consistency and safety. Features and Benefits • Standard M14 thread • Suitable for corded or cordless angle grinders • Heavy duty carbon steel bristles • Excellent for rust and paint removal Specifications • Stanley Part No: STA36080 • Connection: M14 • Diameter: 70mm • Max Rotation Speed: 12,000 RPM
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
