Festool OF 2200 EB-Plus 574349
Diamond Core Bits & Milling Cutters1573
 |
3 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. Specifications • Shank Diamet more→er: 12 mm • Dia Metric: 24.3 • Cut Length Metric: 50 • Overall Length Metric: 101 • Bearing Dia Metric: 19 • Angle: 3
 |
Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eig more→ht Flutes BS 122/4. Specifications • Milling Diameter: 20mm • Shank Diameter: 16mm • Length of Cut: 38mm • Overall Length: 83.5mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 15 • Cut Length Metric: 25 • Overall Length Metric: 67 • Type or Grade: Centre tip
 |
Ideal for producing nosings and attractive edges. Specifications • Shank Diameter: 1/2 • Dia Metric: 35.2 • Cut Length Metric: 35 • Overall Length Metric: 83 • Bearing Dia Me more→tric: 16 • Radius 1 Metric: 9.5
 |
Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Has twin bearings for stability by increasing the bearing surface and is a more→n industrial profiling tool for longer runs of work. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 38.1 • Overall Length Metric: 104 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 90
 |
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
 |
Trend Snappy Countersink - 82 degree included angle Made from tool steel with an 82degree pitch, the countersink is an affordable, quality solution for all your general countersinking needs. Direct more→fit to Trend Snappy and compatible chucks for fast swaps between bits as required. Designed for use in hard and softwoods and abrasive materials such as ply, MDF and chipboard. Short overall length ideal for work in tighter spots. Fast cutting for clean countersinking across the ranges of suitable materials. Specifications • Shank Diameter: 1/4 hex • Dia Metric: 15.8 • Angle: 82
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/2 • Dia Metric: 4 more→.7 • Dia Imperial: 3/16 • Cut Length Metric: 11 • Overall Length Metric: 56
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
