Festool OFK 500 Q R3 574184
Diamond Core Bits & Milling Cutters96
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 1/4 • Dia Metric: 18.7 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 60 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 3
 |
The Halls High Speed Steel Countersink with 1/4in hexagon shank, 3 flute 90° included angle. Designed for use with power tools and for use on metal.Size. 12.4mm.Angle. 90° .Additional Information: more→• Countersink Type: Countersink&bul
 |
Trend 35mm Hinge Sinking Cutter - 8mm shank for melamine faced boards Affordable cutter for drilling 35mm diameter recesses for Euro style kitchen hinges. TCT (Tungsten Carbide Tipped) cutting face more→s for durable, long life performance. Perfect for use on melamine faced boards with abrasive cores such as chipboard and MDF. Accurate, consistent drilling ensures quicker results when doing single jobs or batch work. Designed for pillar drill use, the 8mm diameter shank will fit smaller drills for maximum compatibility. Specifications • Shank Diameter: 8 mm • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 57 • Type or Grade: TCT
 |
Manufactured from a Cobalt-based HSS (M42), a premium grade high speed tool steel, heat treated to surpass the hardness of other HSS materials. The increased cobalt content helps retain hardness at el more→evated temperatures. This increased hot hardness makes the material especially suited for machining stainless steels and temperature resistant alloys. It also gives the material increased wear resistance needed for machining in highly abrasive cutting applications. M42 is also a very tough grade and can therefore cope with the most aggressive applications in most materials. The Aluminium Titanium Carbo-Nitride (AlTiCN) multilayer coating has a hardness of 3700HV which surpasses many other nitride …
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Impe more→rial: 1/2 • Cut Length Metric: 10.3 • Overall Length Metric: 44.5 • Angle: 60
 |
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approxim more→ate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications • Shank Diameter: 1/2 • Dia Metric: 18.2 • Cut Length Metric: 50 • Overall Length Metric: 103 • Bearing Dia Metric: 18.2
 |
For coves and part of a rule joint. Specifications • Shank Diameter: 1/4 • Dia Metric: 16 • Cut Length Metric: 19.5 • Overall Length Metric: 51 • Radius 1 Metric: 8
 |
For coves and part of a rule joint. Specifications • Shank Diameter: 1/2 • Dia Metric: 38.1 • Cut Length Metric: 31.7 • Overall Length Metric: 70 • Radius 1 Metric: 19.1
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
