Fieldmann FDUB 70605-0
Cutting Discs269
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. They have a self-sharpening feature, which increases high stock removal and durability. more→The strong X-weight polyester-cotto
 |
• Ideal for cutting concrete.• Cold pressed sintering allows the disc to be more durable.• Can be used for dry-cutting. • 15mm Diamond segments allow for longer use per disc.Ideal for cutting concrete more→. Cold pressed sintering allows the disc to be more durable. Can be used for dry-cutting. 15mm Diamond segments allow for longer use per disc.• Ideal for cutting concrete. • Cold pressed sintering allows the disc to be more durable. • Can be used for dry-cutting. • 15mm Diamond segments allow for longer use per disc. • Model No. WDC115Technical Specification:D
 |
Reliable Cuts - The Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-qu more→ality standards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting building materials such as concrete and masonry. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Universal Building Materials • Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials • Optimised …
 |
These premium-quality resin-bonded aluminium oxide flap discs provide durability and fast results. The strong X-weight polyester-cotto
 |
Suitable for cutting stone, concrete and decorative masonry. Specifications • Product Code: D-18714 • Diameter: 115 mm • Thickness: 3 mm • Bore: 22.2mm • Centre: Flat • P more→ack Quantity: 1
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
Wire & Cup Brushes219
 |
Price from £18.95
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire Knot Cup Brush 65mm M14 x 2.0 Thread
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M14.Wire Gauge. 0.35.Wire Type. Steel.Max. R.P.M. 12,500.Addition
 |
Price from £8.95 up to £14.99
Compare prices4→Compare prices and buy Faithfull Wire Brush Shaft Mtd 70 X 25Mm 0,30Mm, Multi FAIWBSI70
Industrial Wire Cup Brush for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Max. Cutting Speed: 12 more→,500 rpm.Shaft: 6mm (1/4in). Features: 6mm shank For cleaning paint or deburring moulds or castings For cleaning paint or deburring moulds or castings Suitable for hard-to-reach areas Can be used in industrial power tools at higher speeds Specifications: Dimensions: H:12.5 x W:5.0 x D:8.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBSI70
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Brass Wire Brush 50mm 6mm Shank
Fine Finish on Steel - The Wire Cup Brush delivers an extra-fine surface finish. This Wire Cup Brush is fitted with brass-coated crimped wire for light-to-medium
 |
Price from £3.49 up to £3.68
Compare prices5→Compare prices and buy Sealey Flat Top Decarbonising Brush 25mm
• Flat trimmed brush with brassed and crimped filaments for extra rigidity.• ø6 x 26mm Shaft.• Trim Length/ø: 28/25mm.Flat trimmed brush with brassed and crimped filaments for extra rigidity more→. ø6 x 26mm Shaft.• Flat trimmed brush with brassed and crimped filaments. • ø6 x 26mm Shaft. • Trim Length/ø: 28/25mm. • Model No. VS1803Technical Specification:N
 |
Price from £3.33 up to £4.78
Compare prices8→Compare prices and buy Draper Rotary Wire Brush, 6 x 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £8.99 up to £9.95
Compare prices4→Compare prices and buy Lessmann DIY Cup Brush with Shank 50mm, 0.25 Brass Wire LES43012607
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: more→0.35 Steel, Diameter: 50mm.430.133.07
 |
Price from £2.95 up to £3.09
Compare prices4→Compare prices and buy Faithfull Wire End Brush 25mm Flat End
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds.
 |
Price from £1.49
Compare prices3→Compare prices and buy BlueSpot Flat Crimped Steel Wire Wheel Brush 50mm 6mm Shank
The BlueSpot Tools Flat Wire Wheel Brush is ideal for preparing metal surfaces for welding and painting. Its 6mm (1/4in) shank fits most electric drills.This BlueSpot Tools Flat Steel Wire Wheel Brush more→has the following specifications: Shank: 6mm (1/4in).Wire: 0.3mm.Diameter: 50mm.Max. Safe Speed: 4,500 RPM.Additional Information:&bu
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
