Flex L 10-10 125 (437.980)
Cutting Discs237
 |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
 |
Bevels tubes as they cut and lasts longer than conventional cutting wheels.Features
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Cuts Virtually Anything - The X-LOCK Multi Construction Cutting Disc cuts virtually anything without having to change discs. Made from a special abrasive mix, it enables working on various materials. more→In addition, the thin disc offers easy and fast cutting with little exertion of force, produces less noise and minimum dust and prevents blue discolouration or burr formation. X-LOCK cutting discs also fit standard angle grinders. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Reliable Cutting - The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. It is compatible w more→ith angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cutting in Metal • Standard for Metal Cutting Disc cuts reliably through metal • The aluminium oxide disc is designed for general use with metal Specifications Specification: A 30 S BF Diameter: 125mm Bore size: 22,23mm Thickness: 2,5mm Bore diameter: 22,23mm Thickness 2: 2,5mm
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
Diamond Cutter / Concrete / Quantity 1 Piece / Disc Diameter 125 mm / Disc Thickness 2 mm / Bore 22.23 mm
 |
These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 125mm • Thickness: 1.2mm • Bore: 22.23mm Contents • 10 Discs
Wire & Cup Brushes320
 |
Price from £6.95 up to £7.56
Compare prices5→Compare prices and buy Sealey Twist Knot Wire Flat Brush Ø75mm with Ø6mm Shaft
• Twist knot flat wire wheel.• Stainless steel.• Shaft: ø6mm. • Width: ø75mm.• Max Speed: 12000rpm.Twist knot flat wire wheel, ø75mm width and a ø6mm shaft.• Twist knot flat wire w more→heel. • Stainless Steel. • Shaft: ø6mm. • Width: ø75mm. • Max Speed: 12000rpm. • Model No. TKFBS75Technica
 |
Price from £6.95 up to £7.56
Compare prices5→Compare prices and buy Sealey Conical Wire Brush Ø100mm M14 x 2mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
 |
Price from £31.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 29mm 6mm Shank 456278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 29mm.Wire: 0.35 Steel.Additiona
 |
Price from £30.95 up to £38.99
Compare prices6→Compare prices and buy Sealey Angled Wire Wheel Ø100mm for SA695
• Angled wire wheel for Model No. SA695 Smart Eraser Kit.Angled wire wheel for Model No. SA695 Smart Eraser Kit.• Angled wire wheel for Model No. SA695 Smart Eraser Kit. • Model No. SA695WATechnica
 |
Price from £16.95
Compare prices4→Compare prices and buy Bosch X Lock Knotted Wire Wheel 115mm X-Lock 2608620731
Aggressive Cleaning on Metal - The X-LOCK Heavy for Metal Wire Wheel provides an aggressive cleaning performance. It is fitted with knotted wire that makes it perfect for heavy-duty cleaning applicati more→ons on small metal surfaces. It is suitable for use with X-LOCK angle grinders. Changing brushes is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Price from £11.95 up to £17.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush 80 X M14X2 S/S 0,30Mm FAIWBC80S
Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for industrial use a more→nd more specialist applications. Features: For use on s/less steel and heavier duty applications M14 thread mount M14 thread mount Specifications: Dimensions: H:11.5 x W:6.0 x D:9.0 cm Colour: Green Guarantee:5 years Material: Steel Model Number: FAIWBC80S
 |
Price from £39.95
Compare prices3→Compare prices and buy Lessmann X Lock Non Sparking Stainless Steel Knotted Wire Wheel 115mm X-Lo
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Stainless Steel Knot Bevel Brush 115mm Non Spark
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Brush 50mm 6mm Shank 2608622006
Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
