Flex L 810 (450 820)
Cutting Discs164
 |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø125/22mm.
 |
Fast and Powerful Cutting - The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced pheno more→l resin, which copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
 |
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
Quantity: 1; Diameter [mm]: 125; Thickness [mm]: 2; Bore Diameter [mm]: 22.23; Supplementary Info: BETON
 |
Faithfull Abrasive Jumbo Flap Discs contain up to 40% more abrasive than standard flap discs, providing a considerably longer working life. Manufactured from long lasting Zirconia Alumina. Resin bonde more→d for extra strength and durability. Designed for use with most angle grinders of the corresponding size. Ideal for use on wood, metal, plastic and stainless steel.Diam Size 127mmGrade Medium 60 GritBore 22.23mm Additional Information:&bu
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
Reliable in Metal - The Standard for Metal Grinding Disc is a reliable choice for grinding work on metal. Its aluminium oxide abrasive grain is well suited for general metal applications. It is intend more→ed for grinding metal. It is suitable for use with hand-held angle grinders. Maximum work safety thanks to the optimum three-layer fibreglass net. Manufactured in accordance with EN12413 With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Choice for Metal • Standard for Metal Grinding Disc is a reliable choice for metal grinding • Aluminum oxide abrasive grain, functional fillers, additives with phenol resin bond matrix suited for metal applications …
 |
Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. more→Specifications • Diameter: 125mm • Bore: 22.23mm • Ring: 20mm • Pack Quantity: 1
Wire & Cup Brushes215
 |
Price from £3.34 up to £3.49
Compare prices5→Compare prices and buy Sealey Flat Top Decarbonising Brush 13mm
• Flat trimmed brush with brassed and crimped filaments for extra rigidity.• ø6 x 20mm Shaft.• Trim Length/ø: 20/13mm.Flat trimmed brush with brassed and crimped filaments for extra rigidity more→. ø6 x 20mm Shaft.• Flat trimmed brush with brassed and crimped filaments for extra rigidity. • ø6 x 20mm Shaft. • Trim Length/ø: 20/13mm. • Model No. VS1802Technical Specification:N
 |
Price from £3.16 up to £4.22
Compare prices6→Compare prices and buy Draper Wire Cup Brush, 40mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £6.95 up to £8.40
Compare prices4→Compare prices and buy Sealey Wire Brush Set 8pc Brassed
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm (x1), ø more→75mm (x1), Removable Shafts (x3).• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. Crimped brassed steel filaments add extra rigidity and cleaning power. Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm(x1), ø75mm (x1), Removable Shafts (x3).• Suitable for use with power tools up to the maximum rated speed (4500rpm). • Shaft: ø6mm. • Contents: Brushes; Flat Wire …
 |
Price from £17.95 up to £20.49
Compare prices4→Compare prices and buy Lessmann 0.35 Cimped Steel Wire Conical Bevel Brush 100mm M14 Thread LES42
The special shape of the bevel brush enables the user to work in hard to reach places. They have been designed for heavy-duty use, for the preparing of metal surfaces before painting, and the removal more→of slag, rust, scale, or concrete waste. Diameter: 100mm.Width: 10mm.Bore: M14.Wire Gauge: 0.35.Wire Type: Steel STA Crimped.Max. R.P.M.: 12,000.Addition
 |
Price from £10.19 up to £13.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Brass Coated Wire Cup Brush 70mm M14 Thread 1608614020
Extra-Fine Finish - The Clean for Metal Wire Cup Brush delivers an extra-fine surface finish. The wire cup brush is fitted with brass-coated crimped wire for light- to medium-duty cleaning application more→s. It is suitable for removing coatings, rust and paint stripping on medium to large metal and non-ferrous metal surfaces. This wire cup brush is also suitable for roughing, matt sanding, cleaning formwork boards and facings. It is intended for use with angle grinders. The brass-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster …
 |
Price from £3.49 up to £3.71
Compare prices4→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 26m
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
 |
Price from £12.19 up to £13.95
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (6 Piece)
• Set includes a 25mm wire end brush, 75mm wire cup brush, and three wire wheel brushes (50, 75, 100mm) • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of more→surfaces • Hardened dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance&hell
 |
Price from £7.95 up to £11.99
Compare prices5→Compare prices and buy Faithfull Wire Cup Brush T/Knot 65X M10X1,5 0,5Mm FAIWBT65MC
Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for industria more→l use and more specialist applications. Features: For heavier duty applications For use with angle grinders For use with angle grinders Specifications: Dimensions: H:11.0 x W:6.0 x D:9.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBT65MC
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
