Grand MShU-125-1550SE Professional
Cutting Discs268
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Reliable Cutting - The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. It is compatible w more→ith angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cutting in Metal • Standard for Metal Cutting Disc cuts reliably through metal • The aluminium oxide disc is designed for general use with metal Specifications Specification: A 30 S BF Diameter: 125mm Thickness: 2,5mm Thickness 2: 2,5mm Bore size: 22,23mm Bore diameter: 22,23mm
 |
Lasts up to 100x longer than a bonded cutting disc - Cutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical sme more→ll of bonded discs burning away while they cut. With the EXPERT Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to a shop to buy new metal discs. The EXPERT Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, produces no c…
 |
If you like to take care of every detail in your home and own the latest products that will make your life easier, purchase Cutting disc Tyrolit Ø125 x 1,2 x 22,23 mm at the best price.. Type: Cutting more→disc. Recommended use: Ceramic. Weight: 140 g
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Specifications:
 |
Suitable for use with angle grinders, these flap discs have strips of abrasive material and can be used for grinding, shaping or rough sanding on a range of materials. Features and Benefits • Des more→igned for standard 125mm angle grinders • Suitable for a range of materials, including wood, metal, masonry and PVC • Long life Specifications • Stanley Part No: STA32126 • Disc Diameter: 125mm • Grit: 60 Grit
 |
• Value plus blade suitable for cutting hard and medium materials including concrete, brick and stone.Value plus blade suitable for cutting hard and medium materials including concrete, brick and ston more→e.Technical Specification:B
Wire & Cup Brushes212
 |
Price from £2.95
Compare prices2→Compare prices and buy Faithfull Crimped Wire End Brush 25mm 6mm Shank WBS25E
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £24.99 up to £39.99
Compare prices6→Compare prices and buy Bosch 0.5mm Crimped Steel Wire Cup Brush 100mm M14 Thread 1608614011
Extra-Fine Finish - The Clean for Metal Wire Cup Brush provides an extra-fine surface finish. The cup brush is fitted with crimped wire for light- to medium-duty cleaning applications. Ideal for use o more→n metal, it is suitable for cleaning work on medium to large steel surfaces, such as removing coatings, rust and cleaning formwork boards and facings. The cup brush is also suitable for roughing, matt sanding and paint stripping. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, …
 |
Price from £21.95
Compare prices2→Compare prices and buy Lessmann 0.3 Steel Wire Cup Brush 70mm 6mm Shank LES437162
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diame
 |
Price from £3.16 up to £4.72
Compare prices6→Compare prices and buy Draper Rotary Wire Brush, 6 x 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £5.71 up to £5.99
Compare prices6→Compare prices and buy Bosch 1609200269 Pencil Brush for Drills and Straight Grinders
As a leading manufacturer for power tools accessories, Bosch offers the ideal accessories for virtually all applications
It is our aim to develop appropriate accessories for more efficient work more→ing
The research and development departments at Bosch work to develop and optimize accessories in line with the needs of users
It is our aim to develop appropriate accessories for more efficient work more→ing
The research and development departments at Bosch work to develop and optimize accessories in line with the needs of users
|
Price from £14.95
Compare prices2→Compare prices and buy Lessmann 0.3 Steel Wire Cup Brush 50mm 6mm Shank LES435162
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diame
 |
Price from £3.49 up to £3.68
Compare prices5→Compare prices and buy Sealey Flat Top Decarbonising Brush 25mm
• Flat trimmed brush with brassed and crimped filaments for extra rigidity.• ø6 x 26mm Shaft.• Trim Length/ø: 28/25mm.Flat trimmed brush with brassed and crimped filaments for extra rigidity more→. ø6 x 26mm Shaft.• Flat trimmed brush with brassed and crimped filaments. • ø6 x 26mm Shaft. • Trim Length/ø: 28/25mm. • Model No. VS1803Technical Specification:N
 |
Price from £8.49
Compare prices2→Compare prices and buy Lessmann Precision End Wire Brush Pointed End 12mm 6mm Shank LES451162
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mm.Wire Height: 20mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
