Graphite 59G120
Cutting Discs237
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
Makita's A36N grinding discs were designed to out-perform all other aluminium grinding discs on the market. The unique bond structure is a combination of grit impregnated with a substance called stear more→ic acid. This specially formulated mix ensures lubrication is present between the grit and work surface at raised emperatures. Due to the low melting point of aluminium, problems can arise once a grinding surface reaches melting point. The useful substance present within the bond structure acts as a lubricant to reduce friction between grit and workpiece. Lower friction = less heat build up. By reducing the heat element, there is less possibility of melted aluminium sticking to the grinding disc …
 |
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …
 |
Features:- For reliable cutting in general building material- Optimized diamond matrix in high quality standard for solid results
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Cuts Virtually Anything - The X-LOCK Multi Construction Cutting Disc cuts virtually anything without having to change discs. Made from a special abrasive mix, it enables working on various materials. more→In addition, the thin disc offers easy and fast cutting with little exertion of force, produces less noise and minimum dust and prevents blue discolouration or burr formation. X-LOCK cutting discs also fit standard angle grinders. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Specifications:
 |
Fast Cuts - The Best for Universal Turbo Diamond Cutting Disc provides fast cuts in universal building materials. Its optimised diamond matrix provides the fastest cuts through a variety of materials. more→The disc's matrix shape has been developed for universal cuts with a near-perfect finish for all visible cutting edges. Additionally, this product cuts quickly while producing very little vibration. Use this disc for cutting building materials such as concrete and masonry. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Fast Cuts in Universal Building Materials • Best for Universal Turbo Diamond Cutting Disc provides …
Wire & Cup Brushes323
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Brush 50mm 6mm Shank
Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £2.95 up to £3.58
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Ø50mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB50Technical Specification:D
 |
Price from £22.99 up to £23.95
Compare prices4→Compare prices and buy Lessmann X Lock Non Sparking Knotted Wire Cup Brush 85mm X-Lock
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Steel Knot Cup Brush 85mm Non Spark
 |
Price from £21.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Conical Knot Brush 100mm M10 Thread
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed more→for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.Diameter. 100mm.Width. 10mm.Bore. M10.Wire Gauge.0.50.Wire Type. Steel.Max R.P.M. 12,500.Addition
 |
Price from £5.49 up to £6.71
Compare prices6→Compare prices and buy Sealey Brassed Steel Cup Brush Ø75mm M14 x 2mm
• Suitable for use with power tools up to the maximum rated rpm.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. C more→rimped brassed steel filaments add extra rigidity and cleaning power.• Suitable for use with power tools up to the maximum rated rpm. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. CBC752Technical Specification:D
 |
Price from £24.99 up to £34.95
Compare prices6→Compare prices and buy Bosch 0.5mm Crimped Steel Wire Cup Brush 100mm M14 Thread
Extra-Fine Finish - The Clean for Metal Wire Cup Brush provides an extra-fine surface finish. The cup brush is fitted with crimped wire for light- to medium-duty cleaning applications. Ideal for use o more→n metal, it is suitable for cleaning work on medium to large steel surfaces, such as removing coatings, rust and cleaning formwork boards and facings. The cup brush is also suitable for roughing, matt sanding and paint stripping. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, …
 |
Price from £17.95 up to £21.99
Compare prices4→Compare prices and buy Faithfull Wire Conical Brush 115Mm Xlock Ss, Multi FAIWBCTSSXL
X-LOCK Conical Wire Brush for heavy-duty applications. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement from welds, edges and grooves. For use on stainless ste more→el surfaces, aluminium and non-ferrous metal surfaces. Using standard wire brushes on stainless steel can contaminate and cause the material to rust. The X-LOCK quick change system ensures a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Features: X-LOCK quick change system for fast change between tools 0.5mm twist knot stainless steel wire (304) 0.5mm twist knot stainless steel wire (304) Use with stainless steel, aluminium and non-ferrous …
 |
Price from £13.95
Compare prices3→Compare prices and buy Lessmann Crimped Wire Wheel Brush 70mm 6mm Shank
The Lessmann Wheel Brushes are fitted with a 6mm shank. The tight filling wire and powerful running makes these brushes excellent tools. These encapsulated brushes have a long service life due to the more→bedding of wire in plastic, which also prevents end breakage. The brushes have a consistent working width.The Lessmann Knotted Wheel Brush With Shank has the following specification: Wire Type: SteelDiameter: 70mmWidth: 13mmShank: 6mmWire Gauge: 0.30Max Speed: 15,000/rpmAddit
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
