Greenworks GD24AG 3200207UA
Cutting Discs237
 |
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
Suitable for use with angle grinders, these flap discs have strips of abrasive material and can be used for grinding, shaping or rough sanding on a range of materials. Features and Benefits • Des more→igned for standard 125mm angle grinders • Suitable for a range of materials, including wood, metal, masonry and PVC • Long life Specifications • Stanley Part No: STA32126 • Disc Diameter: 125mm • Grit: 60 Grit
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue and is easier to control providing better quality and consistency of your surface finish. The layered disc is cooler and quieter than typical grinding/abrasi
 |
Cuts materials that angle grinders previously couldn’t
Extreme durability is built in with Bosch Carbide Technology.
Click it on with X-LOCK – the fastest accessory-chang
Ideal for cutting multiple materials with an angle grinder. Cuts wood and embedded screws and nails. plastic pipes. and makes accurate cut-outs in tough panels such as laminates and drywall.
Scope of delivery: 1 x Bosch Expert Carbide Multi Wheel X-LOCK Cutting Disc 125 mm, 1 mm, 22.23 mm
Extreme durability is built in with Bosch Carbide Technology.
Click it on with X-LOCK – the fastest accessory-chang
Ideal for cutting multiple materials with an angle grinder. Cuts wood and embedded screws and nails. plastic pipes. and makes accurate cut-outs in tough panels such as laminates and drywall.
Scope of delivery: 1 x Bosch Expert Carbide Multi Wheel X-LOCK Cutting Disc 125 mm, 1 mm, 22.23 mm
 |
DeWalt's Laser welded Diamond Cutting Disc is manufactured using advanced bond technology which increases blade productivity and operating life. The blade has a layer of pre-alloyed metal which enclos more→es the diamond creating a pellet that is held more securely and distributed better within the segment. Specifications • Diameter: 125mm • Bore: 22.2mm • Thickness: 2mm • Performance: Extreme • Applications: Cutting Features and Benefits • Pre-alloyed metal layer • Laser welded segments • High quality, low carbon steel core • For use with corded and cordless angle grinders
 |
The CorePlus General-Purpose Diamond Blade utilises hybrid turbo technology (HTT) interspersed turbo segments provide the optimum balance between long life and fluid speed. It has a precision-engin
 |
76.97Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Diamond Cutter / Plastic / Quantity 1 Piece / Disc Diameter 125 mm
 |
Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine. Compatible with 115mm angle grinders with a 22.23mm bore. Manufactured to EN12413 standards. Manufactured to EN12413 standards Features and Benefits • Designed for fast straight cutting on various metals including steel, structural steel and sheet metal • Made from premium quality …
Wire & Cup Brushes309
 |
Price from £2.39 up to £3.49
Compare prices5→Compare prices and buy Faithfull 5307506130 Wire Brush 75Mm X 6Mm Shank 0.30 Wire FAIWBS75C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and de more→signed to operate with power tools up to a maximum of 4 500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £13.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Brass Coated Wire Cup Brush 70mm M14 Thread 1608614020
Extra-Fine Finish - The Clean for Metal Wire Cup Brush delivers an extra-fine surface finish. The wire cup brush is fitted with brass-coated crimped wire for light- to medium-duty cleaning application more→s. It is suitable for removing coatings, rust and paint stripping on medium to large metal and non-ferrous metal surfaces. This wire cup brush is also suitable for roughing, matt sanding, cleaning formwork boards and facings. It is intended for use with angle grinders. The brass-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster …
 |
Price from £12.68 up to £14.95
Compare prices5→Compare prices and buy Lessmann 435.162 Cup Brush With Shank D50Mm X H20Mm 0.30 Steel Wire LES435162
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust paint dirt or scale and for polishing.Diame
 |
Price from £15.95
Compare prices5→Compare prices and buy Bosch Conical 0.35mm Inox Crimped Wire Wheel 100mm M14 Thread 2608622108
Extra-Fine Finish - The Clean for Inox Bevel Brush provides an extra-fine surface finish. Its conical bevel brush is fitted with crimped wire for light- to medium-duty cleaning applications in hard to more→reach areas, making it ideal for the cleaning of smaller areas at high circumferential speeds. The brush can be used on stainless steel, aluminium or non-ferrous metal surfaces and on edges or in grooves. It is also suitable for removing rust, roughing, matt sanding, paint stripping and removing annealing colour on welded seams. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are …
 |
Price from £14.95
Compare prices5→Compare prices and buy Bosch 0.5mm Knotted Conical Steel Wire Wheel Brush 100mm M14 Thread 2608622011
Coarse Finish on Metal - The Heavy for Metal Bevel Brush delivers an extra-coarse surface finish. Its conical bevel brush is fitted with knotted wire for heavy-duty cleaning applications in hard-to-re more→ach areas. It is suitable for cleaning smaller steel surfaces and in grooves or on edges at high circumferential speeds. Ideal for use in metal, this brush is also suitable for removing heavy rust, paint stripping, deslagging, deburring, descaling and cleaning welding seams. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface …
 |
Price from £2.12 up to £2.95
Compare prices5→Compare prices and buy Faithfull 3105006130 Wire Cup Brush 50Mm X 6Mm Shank 0.30Mm Wire FAIWBS50
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in more→) shank and is designed to operate with power tools with a maximum speed of 4 500/min. Type: Cup.The FAIWBS50 Wire Cup Brush has the following specifications: Face Diameter: 50 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.PTDFAIWBS50
 |
Price from £6.64 up to £14.99
Compare prices6→Compare prices and buy Faithfull Wire Brush Shaft Mtd 70 X 25Mm 0,30Mm, Multi FAIWBSI70
Industrial Wire Cup Brush for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Max. Cutting Speed: 12 more→,500 rpm.Shaft: 6mm (1/4in). Features: 6mm shank For cleaning paint or deburring moulds or castings For cleaning paint or deburring moulds or castings Suitable for hard-to-reach areas Can be used in industrial power tools at higher speeds Specifications: Dimensions: H:12.5 x W:5.0 x D:8.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBSI70
 |
Price from £5.86 up to £8.95
Compare prices6→Compare prices and buy Draper 41447 Steel Twist-Knot Wire Cup Brush 65Mm M14 each 1
This twist-knot wire cup brush is designed for heavy-duty work and delivers aggressive stock removal on ferrous metals. The brush is made from hardened steel wire which gives a high level of durabili more→ty and performance. The twist-knots are tight for a longer life and the twisted construction is perfect for quicker material removal in deburring and cleaning tasks. The cup shape works flat to the surface to cover a large surface area. Compatible with most angle grinders with an M14x2 connection.PTDD
Power Tool Batteries & Chargers3
 |
44.99Buy!
£
£
MachineMart.co.uk
Delivery: to United Kingdom
Report
This Greenworks charger has been designed to fully charge a 2Ah battery in 45 minutes, whilst the diagnostic LED’s indicate when the charging process has finished. Click to see the whole Green more→works 24V/48V range.
 |
Price from £42.99 up to £43.95
Compare prices6→Compare prices and buy Greenworks 24V 4A Battery Charger, Green GWG24C4
This Greenworks GWG24C4 24V Port Charger is compatible with all Greenworks 24V batteries. Offering the ability to charge 1 24V batteries in one unit. With intelligent electronics the 24v Twin Port Cha more→rger protects the battery cells giving maximum charge capacity and maximum battery life. Works with: 2Ah 24V Batteries & 4Ah 24V Batteries. Features and Benefits Charges the 24V 2Ah with a full charge in 30 minutes^ Charges the 24V 4Ah battery with a full charge in 6 minutes LED's indicate charging has finished Wall mountable design Energy Star Rated Specifications Dimensions: H:8.4 x W:10.0 x D:17.6 cm Colour: Green Guarantee:2 Year Warranty Model Number: GWG24C4
 |
Price from £34.95
Compare prices5→Compare prices and buy Greenworks G24C 24v Cordless Standard Li-ion Battery Charger 240v
Greenworks’ charger for the 24v cordless range is compatible with all Greenworks’ 24v batteries – no self-discharge and fast charging. Specifications • Voltage 24v • Output 60 W • Charg more→ing time 100% (2Ah) < 60 min • Charging time 100% (4Ah) < 120 min • Weight 0.512 kg Features and Benefits • Suitable for all Greenworks 24v lithium ion batteries
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
