Haisser RH-224BCS

Rapidaptor technology for rapid bit change
Rapidaptor universal holder with ring magnet for bits with 1/4" hexagon drive
Ring magnet and stop sleeve for secure fit of the screw on the ho more→lder
1/4" hexagon drive

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

• HSS Nova 50 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 50 mm. Specifications: Cutting depth: 50 mm Bore Ø: 26 mm

Conical profile step drill bit allows multiple hole sizes to be produced from a single bit. Recommended for softer or thinner materials. Suitable for enlarging existing holes. Features & Benefits &bu more→ll; Ideal for use on Ferrous and Non-Ferrous metals and sheet metal Specifications • Shank: 1/4 Hex • Flute: Straight • Application: 4-12

Milwaukee SDS Plus 2-Cut drill bits have 3 offset aggressive power breakers. These produce a demolition effect and create micro cracks in the drilled material. Centering tip ensures immediate spot dri more→lling with pin point accuracy and prevents skidding on smooth surfaces. Enlarged rebar chamfers prevent side tip damage when hitting rebar, this reduces the risk of the drill bit jamming when hitting rebar. Tapered shoulder design provides a thinner shoulder towards drill tip for less friction providing for greater speed. This is Ideal for cordless hammers identified from its tapered shoulder geometry. Reinforced flute has high volume flute geometry for optimum dust removal. Reinforced flute design …

The Faithfull flooring chisels are designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board. They have a hardened and tempered cutting edge. NOT T more→O BE USED FOR CUTTING BRICKSThe Faithfull FAIEC214PG Flooring chisel is fitted with a sturdy rubber safety grip and has the following dimensions:Size: 230 x 57mm (9 x 2.1/4 inch). NOT TO BE USED FOR CUTTING BRICKSAdditional Information:• Length: 230mm (9in)• Width: 57mm (2.1/4in)

This 6mm wood chisel is perfect for intricate carving and shaping in tight, hard to reach areas The Stanley 0-16-251 FatMax Thru Tang Wood Chisel has a blade width of 6mm. The FatMax Thru Tang is 50% more→stronger than the old DynaGrip Pro Chisel and features an ergonomic soft-grip handle for maximum grip and control. They have been manufactured from quality chrome alloy steel with a lacquered blade for corrosion resistance and bevelled edges for accessing tight areas. Features:
- Full-length blade guard for added safety
- Lacquered blade for corrosion protection
- This chisel has bevel edges that allow it to access acute areas
- Ergonomic soft grip CAB handle - for maximum grip and control …

It is compatible with TE-S systems. The Flat Chisel provides less jamming and more progress in concrete than standard flat chisels. The self-sharpening power ribs create not only lateral, but also ver more→tical cracks in the material. This provides a higher material removal rate and prevents the chisel from getting stuck. The chisel is intended for use in concrete and brick for mortising, demolition and adjustment work, including restoring joints and clearing reinforcements.Self-sharpening flat chiselSDS hex flat chisel is ideal for various applications in concrete with less jamming and more progress• Less Jamming and More Progress in Concrete• SDS Hex Flat Chisel is ideal for various applications …

Bahco 434 Series Bevel Edge Chisel has been developed according to the scientific ERGO™ process. The 2-component grip, splitproof handle allows repeated hammer blows, and the blades are manufact more→ured from hardened and tempered steel, which are precision ground for maximum sharpness and long-lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with a safety guard and have rounded shoulders for added safety.Size: 50mm.Additional Information:• Blade Width: 50mm

Bahco 434 Series Bevel Edge Chisel has been developed according to the scientific ERGO process. The 2-component grip, splitproof handle allows repeated hammer blows, and the blades are manufactured fr more→om hardened and tempered steel, which are precision ground for maximum sharpness and long-lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with a safety guard and have rounded shoulders for added safety. Size 16mm.

SDS plus Stubby Chisel Set, 3-Piece: standard chiselling for various renovation/restoration jobs in concrete and brick. 1x Flat chisel 140x20 mm 1x Spade chisel 140x40 mm 1x Pointed chisel 140 mm

Flat Chisel provides standard chiselling for various demolition applications in concrete and brick The Flat Chisel provides standard chiselling for various demolition applications in concrete and bric more→k. Good material removal on light application is made possible by the chisel´s flat cutting edge. The chisel is intended for mortising, demolition and adjustment work as well as for restoring joints and clearing reinforcements. Flat chisel provides standard chiselling for various demolition applications in concrete and brick • Standard Chiselling in Concrete and Brick for Various Demolition Applications Specifications: Total length mm: 520 Chisel cutting edge mm: 35 Materials: Concrete …