Hanskonner HRE1185
Diamond Core Bits & Milling Cutters2349
 |
Drilling and Countersinking in One Step - The Brad Point Drill Bit with Countersink efficiently drills, countersinks and deburrs in one step in wood. Mounted on a brad point drill bit, all three opera more→tions are achievable at once. The countersink is suitable for use on hard and soft wood, laminated and non-laminated chipboard and plywood. It is intended for use in drill stands and drill drivers. This multi-functiona
 |
3 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. Specifications • Shank Diamet more→er: 12 mm • Dia Metric: 24.3 • Cut Length Metric: 50 • Overall Length Metric: 101 • Bearing Dia Metric: 19 • Angle: 3
 |
With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.
 |
Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge ro more→uters. Cutters above and including 9.5mm have TCT plunge Centre tip
 |
Template thickness should be at least 5mm thicker than cutter cut length of cutter. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/4 • Dia Metric: more→12.7 • Dia Imperial: 1/2 • Cut Length Metric: 16 • Overall Length Metric: 66.61 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 60
 |
Small panelling cutters, popular for decorative cupboard doors and furniture embellishments. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Leng more→th Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 50 • Radius 1 Metric: 2
 |
Manufactured from a Cobalt-based HSS (M42), a premium grade high speed tool steel, heat treated to surpass the hardness of other HSS materials. The increased cobalt content helps retain hardness at el more→evated temperatures. This increased hot hardness makes the material especially suited for machining stainless steels and temperature resistant alloys. It also gives the material increased wear resistance needed for machining in highly abrasive cutting applications. M42 is also a very tough grade and can therefore cope with the most aggressive applications in most materials. The Aluminium Titanium Carbo-Nitride (AlTiCN) multilayer coating has a hardness of 3700HV which surpasses many other nitride …
 |
This cutter produces the perfect radius groove on coving, fluting, picture frames and edge moulds when working with softwoods, hardwoods, MDF and plywood. Shank: 1/4in. Features: For perfect radius gr more→oove on coving, fluting, picture frames and edge moulds TCT TCT Specifications: Dimensions: H:15.0 x W:1.9 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB61
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
