Hitachi G12S2
Cutting Discs382
 |
• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.General-p
 |
Up to 3x more precise than a standard ceramic diamond discThe tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore crucia more→l yet difficult. The Expert HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics.Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut.The Bosch Expert …
 |
Contains a selection of cutting discs for 115mm angle grinders. With segmented and continous rim diamond blades, plus abrasive cutting discs for masonry, metal and tiles, this Stanley FatMax accessory more→set covers a wide range of applications. With a standard 22.2mm bore, these discs will fit most 115mm angle grinders. Features & Benefits • Versatile cutting disc set for small angle grinders • Includes two diamond blades and four abrasive cutting discs • Suitable for cutting concrete, masonry, bricks, metal and tiles Specifications • Stanley Part No: STA38085 • Disc Diameter: 115mm • Bore: 22.2mm
 |
• Zirconium flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• More durable than normal sanding discs.• Abrasive flaps are attached to rigid disc wi more→th epoxy adhesive - does not require backing pad.• Depressed centre discs suitable for electric and air tools.Technical SpecificationBo
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock diamond cutting discs are suitable for cutting concrete, granite and marble. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in seconds …
 |
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia A more→lumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc A40 115mm. 40 grit is suitable for rough grinding. The slightly conical shape is ideal for grinding at 15–25-deg
 |
The X571 Best for Metal is compatible with angle grinders. The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia al more→umina/semi-fria
 |
The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a brilliant removal rate and lif more→etime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. It is available in angled or straight options on fibreglass …
Wire & Cup Brushes212
 |
Price from £5.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Inox Steel Wire Brush 50mm 6mm Shank 2608622117
The Wire Cup Brush provides a good fine surface finish. It is fitted with crimped wire for light-to-medium
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Brush 50mm 6mm Shank 2608622006
The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £5.49
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 60mm 12mm 6mm Shank LES451161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mmWire Height: 20mmOverall Length: 60mmWire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
7.76Buy!
£
£
Electricalworld.com
Delivery: in United Kingdom
Report
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; ø50mm Wire Cup, ø50mm Flat Wire, ø25mm Decarbonising/C
 |
Price from £4.00 up to £5.68
Compare prices6→Compare prices and buy Draper Hollow Cup Wire Brush, 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £47.95 up to £56.49
Compare prices3→Compare prices and buy Sealey 38pc Cleaning Brush Set Injector Bore
• Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting.• 38-Piece set includes brass, steel and nylon brushes 8-19mm.• Soft grip handle.• One- more→Piece 150mm Extension.• Storage case included.Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. 38-Piece set includes brass, steel and nylon brushes 8-19mm. Soft grip handle. One-Piece 150mm extension. Storage case included.Techni
 |
Price from £12.95
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush Pointed End 23mm 6mm Shank LES453162
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: SteelDiameter: 23mmWire Height: 25mmWire Gauge: 0.30Max Speed: 18,000/rpmAddit
 |
Price from £4.00 up to £4.49
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Wheel Brush 50mm 6mm Shank 2608622112
The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealing colour on welded seam more→s. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with drills with 6-mm shank.Wire …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
