Hitachi G12SS2
Cutting Discs401
 |
• Aluminium oxide flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Pack contains four different levels of abrasion, for assorted applications and more→finishes.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require backing pad.• Depressed centre discs suitable for electric and air tools.• Size/Bore: ø115/22mm.
 |
Cuts materials that angle grinders previously couldn’t - Professionals value angle grinders for their ability to cut tough materials like concrete, stone and metal. With the EXPERT Carbide Multi Wheel more→this wonderful tool can be even more versatile, efficiently cutting all kinds of softer materials such as wood, plastic and modern composites. The EXPERT Carbide Multi Wheel uses sharp carbide grits on its rim to cut multiple materials extremely effectively. The grits are joined to a steel body by a laser technique for an extra strong bond, giving a safe and reliable cutting disc that maintains a constant speed and depth throughout a long lifespan. With the EXPERT Carbide Multi Wheel, your angle gr…
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Designed for cutting metal with angle grinders, these Stanley cutting discs have a depressed centre so the cutting edge is offset from the nut - this allows for better access in tight spaces. Features more→and Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 115mm • Bore: 22mm • Thickness: 3mm • Pack Quantity: 1
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Measuring 115mm in diameter and featuring a 22.23mm bore size, this diamond blade is specifically designed for compatibility with angle grinders, providing optimal performance and extensive coverage. more→The continuous rim design ensures smooth and clean cutting action, making it ideal for a variety of tile materials, including ceramic, porcelain, and stone. Crafted with high-quality diamonds embedded in the continuous rim, this blade excels in delivering precise and chip-free cuts through delicate tile surfaces. The robust construction ensures longevity, providing you with a reliable tool for repeated use on your tiling projects. Features & Benefits • Continuous rim for fine cutting of ceramic …
 |
Fast and Powerful Cutting - The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced pheno more→l resin, which copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
 |
This premium-quality ceramic alumina provides the ultimate performance with the longest life and fastest cutting rate across all abrasives. It has a self-sharpening feature which increases high stock more→removal and durability. The strong plastic backing allows increased flexibility and fast cutting action on medium to high pressure applications. The M14 connection allows for the quick changing of discs. The plastic backing can be trimmed to extend service life. Designed for contoured and flat-edged surfaces. Ideal for sanding, grinding, removing rust and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 115mm angle grinders including Stock …
Wire & Cup Brushes213
 |
Price from £3.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 23mm 6mm Shank WBSI23P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Type: Pointed end Face diameter: 23/60 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm steel Conforms to ISO 9001. and DIN EN1083-1 and 2 Maximum rpm 20,000.Addition
 |
Price from £12.99 up to £26.95
Compare prices6→Compare prices and buy Bosch X Lock Steel Wire Cup Brush 0.5mm 75mm X-Lock 2608620727
Aggressive Cleaning on Metal - The X-LOCK Heavy for Metal Cup Brush, Knotted Wire provides an aggressive cleaning performance. It is fitted with knotted wire for heavy-duty cleaning applications on me more→dium-to-large steel surfaces. It is suitable for use with X-LOCK angle grinders. Changing brushes is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Price from £16.99
Compare prices2→Compare prices and buy Bosch Professional Heavy Inox 75x0.5x125 Mm M14 Brush Cup 2608622060
Heavy for Inox Wire Cup Brush provides an extra-coarse surface finish. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, prod more→ucing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with angle grinders with an M14 thread.Features
 |
Price from £2.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Wheel Brush 50mm 6mm Shank WBS50C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £4.79 up to £5.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Brush 70mm 6mm Shank 1609200270
Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £25.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 22mm 6mm Shank 454278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 22mm.Wire: 0.35 Steel.Additiona
 |
Price from £2.04 up to £2.81
Compare prices7→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 13mm
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 12mm 6mm Shank WBSI12P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
