Hitachi G18SR
Cutting Discs82
 |
The Faithfull Porcelain Series Diamond Blades are ideal for cutting ceramic, porcelain, granite, porcelain based paving and marble. Wet cutting is recommended for a longer blade life and dust suppress more→ion, but they can also be used dry. The long-lasting, 10mm deep, continuous sintered rim enables fast and clean cuts. All blades have a centre core reinforcement plate that prevents the blade de-tensioning to increase blade life and reduce vibration. Conforms to EN 13236.This Faithfull Porcelain Diamond Blade has the following specification: Disc Diameter: 180mmBore: 25.4mmBush: 22.23mmMax. rpm: 13,300Additiona
 |
The CorePlus Hard Tile Turbo Diamond Blade has an ultra-thin, continuous PleXXus Turbo rim segment for precision chip-free porcelain tile cutting. A precision-engin
 |
The Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, which copes with demanding more→applications while delivering good results. Moreover, the disc's precision-manuf
 |
Lasts up to 30x longer than a bonded cutting discCutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical smell o more→f bonded discs burning away while they cut. With the Expert Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to a shop to buy new metal discs.The Expert Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, produces no chem…
 |
The Backing Pad is resistant to high temperatures and breakage. It provides low vibration during use, which increases its endurance. The pad is compatible with fibre sanding discs that include a nut a more→nd has a maximum speed of 13,300 rpm. It is intended for use with angle grinders.Backin
 |
It is suitable for use with hand-held angle grinders. The Expert for Metal Grinding Disc delivers an impressively long lifetime on metal with maximum safety. Its premium aluminium oxide abrasive grain more→, selected functional fillers and additives in a modern phenol resin bond matrix are particularly suited for metal applications. Furthermore, its precision-manuf
 |
Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thi more→ckness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …
 |
The Best for Ceramic Diamond Cutting Disc delivers clean cuts in tiles for fittings in installation work. Smooth cuts with minimal chipping are made possible by the continuous cutting rim. Additionall more→y, the diamond matrix is optimised to cut through tiles. Use this disc on porcelain, tiles and ceramic. • Clean Cuts in Tiles • Best for Ceramic Diamond Cutting Disc delivers clean cuts in tiles • Smooth cuts with minimal chipping are made possible by the continuous cutting rim • Diamond matrix is optimised to cut through tiles Specifications: Diameter mm: 180 Bore diameter mm: 25.40 Cutting width mm: 2,2 Segment height mm: 10 Materials: Stone Materials in Detail: Stoneware …
Wire & Cup Brushes211
 |
Price from £3.49 up to £4.25
Compare prices5→Compare prices and buy Sealey Flat Top Decarbonising Brush 13mm
• Flat trimmed brush with brassed and crimped filaments for extra rigidity.• ø6 x 20mm Shaft.• Trim Length/ø: 20/13mm.Flat trimmed brush with brassed and crimped filaments for extra rigidity more→. ø6 x 20mm Shaft.• Flat trimmed brush with brassed and crimped filaments for extra rigidity. • ø6 x 20mm Shaft. • Trim Length/ø: 20/13mm. • Model No. VS1802Technical Specification:N
 |
Price from £6.99 up to £7.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Wheel Brush 100mm 6mm Shank 1609200274
The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealing colour on welded seam more→s. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with drills with 6-mm shank.Wire …
 |
Price from £5.49
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 60mm 12mm 6mm Shank LES451161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mmWire Height: 20mmOverall Length: 60mmWire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £4.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 50mm 6mm Shank WBSI50
This Faithfull Wire Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. It can be used in industrial power tools at higher speeds. Type: Cup more→Maximum speed: 12,000/min.The FAIWBSI50 Wire Brsh has the following specifications: Face diameter: 50 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £4.49 up to £5.77
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Ø100mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB100Technical Specification:D
 |
Price from £7.49
Compare prices4→Compare prices and buy Bosch 0.3mm Crimped Inox Steel Wire Pencil Brush 25mm 6mm Shank 2608622127
The Pencil Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces. Due to its shape, the pencil brush is ideal for more→cleaning work in very hard-to-reach areas on stainless steel, aluminium and non-ferrous metal surfaces as well as in corners and the inside of pipes and profiles. It is also suitable for removing rust, roughing, matt sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use …
 |
Price from £3.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 23mm 6mm Shank WBSI23P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Type: Pointed end Face diameter: 23/60 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm steel Conforms to ISO 9001. and DIN EN1083-1 and 2 Maximum rpm 20,000.Addition
 |
Price from £4.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 50mm 6mm Shank STA36020
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 50mm • Wheel Thickness: 10mm • Shank Diameter: 6mm
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
