Hitachi HiKOKI G13BYEQ
Cutting Discs238
 |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø125/22mm.
 |
A flat metal cutting disc which is ideal for working on steel. Part of a range of Makita reinforced abrasive cutting and grinding discs which are suitable for use with grinders and disc cutters. Speci more→fications • Model No: D-18667 (replaces A-85313) • Diameter: 125mm • Thickness: 2.5mm • Bore: 22.2mm • Quantity: 1 Note generic image is shown for illustration purposes. Please refer to the description for the specifications of the item you will be purchasingFeatu
 |
The X-LOCK Standard for Inox Cutting Disc delivers reliable performance in Inox. Its thin disc edge supports smooth and easy cutting. In addition, the disc is free from ferrous, sulphurous and chlorin more→ated fillers. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. Use this disc for cutting Inox. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. X-LOCK cutting discs also fit standard angle grinders. Straight 10 Rapido discs in a reclosable tin • Reliable Performance in Inox • X-LOCK Standard for Inox Cutting Disc delivers reliable performance in Inox • Thin disc edge supports smooth and easy cutting • Disc is …
 |
On Modern Construction Sites, Many Different, Hard Materials Have To Be Cut ... The Expert Multimaterial Cut-Off Wheel Is The Ideal Accessory For Busy Construction Professionals Who Have To Cut Concre more→te, Bricks, Roof Tiles And Reinforced Concrete, Because It Simply Offers A Longer Service Life.This Blend Of Optimum Diamond Grit And Advanced Design Features Gives The Bosch Expert Multimaterial X-Lock Diamond Cutting Disc Unsurpassed Durability. It Cuts More Reliably And Longer Than Other Bosch Diamond Blades.Features
 |
It is compatible with angle grinders. This product is intended for use in concrete as well as natural and artificial stone. The high level of balance provides vibration-contr
 |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
 |
The X-LOCK Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality sta more→ndards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting building materials such as concrete and masonry. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. X-LOCK cutting discs also fit standard angle grinders. Pack of 1 • Reliable Cuts in Universal Building Materials • X-LOCK Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building …
 |
Expert Quality, Zirconium Oxide tapered flap discs, ideal for grinding and finishing ferrous or non-ferrous metals. Manufactured from fibre backed abrasive sheet, which is securely fixed to a reinforc more→ed backing disc with a chrome plated metal centre with a 22.2mm bore. Achieves a longer life when compared to resin fibre discs.
Wire & Cup Brushes213
 |
Price from £47.95 up to £56.49
Compare prices3→Compare prices and buy Sealey 38pc Cleaning Brush Set Injector Bore
• Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting.• 38-Piece set includes brass, steel and nylon brushes 8-19mm.• Soft grip handle.• One- more→Piece 150mm Extension.• Storage case included.Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. 38-Piece set includes brass, steel and nylon brushes 8-19mm. Soft grip handle. One-Piece 150mm extension. Storage case included.Techni
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 50mm 6mm Shank WBS50
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) more→shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS50 Wire Cup Brush has the following specifications: Face Diameter: 50 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £8.95
Compare prices3→Compare prices and buy Faithfull Stainless Steel Crimped Wire Cup Brush 70mm 6mm Shank WBSI70
This Faithfull Wire Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. It can be used in industrial power tools at higher speeds. Type: Cup more→Maximum speed: 12,000/min.Face diameter: 70 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm Stainless steel Conforms to ISO 9001. and DIN EN1083-1 and 2Additional Information:&bu
 |
Price from £3.89 up to £5.95
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Wheel Brush 75mm 6mm Shank 1608622015
The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealing colour on welded seam more→s. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with drills with 6-mm shank.Wire …
 |
Price from £5.58 up to £5.95
Compare prices3→Compare prices and buy Sealey Decarbonising Brush Set 2pc
• Brassed and crimped steel brushes with flat and pointed fill. Suitable for decarbonising cylinder head ports and components.• Shank ø: 6mm.Brassed and crimped steel brushes with flat and pointe more→d fill. Suitable for decarbonising cylinder head ports and components.• Brassed and crimped steel brushes with flat and pointed fill. • Suitable for decarbonising cylinder head ports and components. • Shank Diameter: ø6mm. • Model No. VS1801Technical Specification:N
 |
Price from £6.95 up to £7.75
Compare prices4→Compare prices and buy Sealey Wire Brush Set 8pc Brassed
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm (x1), ø more→75mm (x1), Removable Shafts (x3).• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. Crimped brassed steel filaments add extra rigidity and cleaning power. Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm(x1), ø75mm (x1), Removable Shafts (x3).• Suitable for use with power tools up to the maximum rated speed (4500rpm). • Shaft: ø6mm. • Contents: Brushes; Flat Wire …
 |
Price from £5.95 up to £6.70
Compare prices5→Compare prices and buy Makita D-66070 Wire Brush Set for Drill (3 Piece)
Makita D-66070 Wire Brush Set for Drill (3 Piece)
The Makita D-66070 is a 3 Piece Wire Brush Set designed to be used with power tools to remove rust and paint from metal objects.Feature
more→> - Cup type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- Wheel type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- End type: light duty for working on hard to reach areas (pipes and profiles).
Specificatio
- Part Number: D-66070
- Number of Pieces: 3
The Makita D-66070 is a 3 Piece Wire Brush Set designed to be used with power tools to remove rust and paint from metal objects.Feature
more→> - Cup type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- Wheel type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- End type: light duty for working on hard to reach areas (pipes and profiles).
Specificatio
- Part Number: D-66070
- Number of Pieces: 3
 |
Price from £8.95
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire DIY Cup Brush 75mm 6mm Shank LES43013307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
