Hitachi HiKOKI G23SW2 W7Z
Cutting Discs216
 |
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
Contract Diamond Blade has 7mm sintered, diamond impregnated segments. Suitable for wet and dry cutting, and ideal for general cutting applications such as tiles, paving slabs, breeze blocks and brick more→work. Manufactured to EN 13236 Standards. Features: Suitable for wet and dry cutting For general cutting applications such as tiles, paving slabs, breezeblocks and brickwork For general cutting applications such as tiles, paving slabs, breezeblocks and brickwork Specifications: Dimensions: H:28.9 x W:0.9 x D:23.1 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIDB230C
 |
Milwaukee Heavy Duty TORCH Ice Demolition Reciprocating Saw Blade. Strong and Robust 1.06 mm thick body. Shatter resistant bi-metal blade body will bend and flex but not break. Thick 1.06 mm robust to more→rch blade body for precise cuts in sheet metal and pipes. 25 mm blade height for improved stability and minimum vibration. Specifications • Blade Length: 230mm • Teeth per Inch: 18 • Max. Cutting Capacity (Inox): 2-4mm • Max. Cutting Capacity (Metal Pipe): 10-160mm • Max. Cutting Capacity (Non Ferrous Metals): 2-8mm • Max. Cutting Capacity (Steel): 2-8mm • Pack Quantity: 5 Features and Benefits • Robust 1.06 mm thick body • Shatter resistant bi-metal …
 |
Professional Trade Level Diamond Blade with 10mm sintered segments allowing for a longer working life and less blade changes. The aerated core allows for better cutting performance and aids cooling. I more→deal for cutting materials of medium hardness commonly found on the worksite such as class B engineering bricks, concrete kerbs, concrete lintels and beams, reinforced concrete, building blocks, roofing tiles, 30-60 newton block paviours, York stone, concrete pipes and other less abrasive materials. Features: Long working life and less blade changes For cutting materials of medium hardness including concrete kerbs, concrete lintels, concrete pipes etc For cutting materials of medium hardness including …
 |
Carbide Recip Blades for Metal applications are ideal for cutting through a wide range of metals including steel pipe, cast iron and stainless steel. Manufactured with carbide teeth for increased dura more→bility, speed and life. Specifications • Blade Length: 230mm • Teeth Per Inch: 8 • Material: Carbide • Application: Cutting Metal Features and Benefits • Carbide Teeth for increase durability, speed and life • Ideal for cutting through a wide range of metals including steel pipe, cast iron and stainless steel • Tall, thick blade profile designed to increase durability and minimizes blade breaks
 |
MI850 Blades are described as having one of the fastest universal cuts everFeatures:- Marcrist diamond products comply with every known safety standard worldwide- Titanium coated diamonds provide self more→cooling and self sharpening cutting edge- Armoured centre for blade strength beyond belief (Patented)- Precision engineered core, hardened, ground, balanced and tensioned- Noise suppression for semi silent operation (Patented)- Lightning fast- Laser weldedMaterials
We currently have no further description for this item or it does not need any further details. If this product has recently been added we will be working hard to get more information added as soon as possible.
 |
The CorePlus Elite General-Purpose Diamond Blade features an Elite Endurance diamond metal matrix that extends the lifetime of the blade way beyond expectation. A precision-engin
Wire & Cup Brushes320
 |
Price from £39.95
Compare prices3→Compare prices and buy Lessmann X Lock Non Sparking Stainless Steel Knotted Wire Wheel 115mm X-Lock
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Stainless Steel Knot Bevel Brush 115mm Non Spark
 |
Price from £24.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Wheel Brush 125mm 22.2mm Bore
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 125mm.Width: 14mm.Bore: 22.2mm.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12,500/min.Addi
 |
Price from £2.49
Compare prices3→Compare prices and buy Faithfull Flat End Crimped Wire Brush 12mm 6mm Shank
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12 Wire End Brush has the following specifications: Type: Flat End. Face diameter: 12 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel.Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £10.95 up to £15.99
Compare prices4→Compare prices and buy Faithfull Flat Wire Brush 115 X 12 X M14X2 0,35Mm, Multi FAIWBCT115
Circular Knot Brush with a M14 thread arbor for direct mounting onto an appropriate angle grinder. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement. Conforms t more→o ISO9001 and DIN EN1083-1 and 2. Max. Cutting Speed: 12,500 rpm. Features: For medium-duty applications Compatible with 115mm angle grinders Compatible with 115mm angle grinders Maximum speed: 12,500 rpm Specifications: Dimensions: H:14.0 x W:2.5 x D:12.5 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBCT115
 |
Price from £13.95
Compare prices4→Compare prices and buy Stanley Twist Knot Wire Cup Brush 70mm M14 Thread
Fitted with an M14 thread for connection to angle grinders, this twist knot steel wire cup brush is ideal for aggressive paint and rust removal or general suface preparation work on metal and stone su more→rfaces. Stanley cup brushes have an internal holding plate for improved consistency and safety. Features and Benefits • Standard M14 thread • Suitable for corded or cordless angle grinders • Heavy duty carbon steel bristles • Excellent for rust and paint removal Specifications • Stanley Part No: STA36080 • Connection: M14 • Diameter: 70mm • Max Rotation Speed: 12,000 RPM
 |
Price from £7.49
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Pencil Brush 10mm 6mm Shank
Coarse Finish on Steel - The End Brush provides a good coarse surface finish. Fitted with knotted wire, it is ideal for medium-duty cleaning applications on small steel surfaces. Its shape makes it id more→eal for cleaning work in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The brush is also suitable for removing heavy rust and varnish as well as stripping paint. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results Cylindrical shank …
 |
Price from £13.95
Compare prices3→Compare prices and buy Lessmann Crimped Wire Wheel Brush 70mm 6mm Shank
The Lessmann Wheel Brushes are fitted with a 6mm shank. The tight filling wire and powerful running makes these brushes excellent tools. These encapsulated brushes have a long service life due to the more→bedding of wire in plastic, which also prevents end breakage. The brushes have a consistent working width.The Lessmann Knotted Wheel Brush With Shank has the following specification: Wire Type: SteelDiameter: 70mmWidth: 13mmShank: 6mmWire Gauge: 0.30Max Speed: 15,000/rpmAddit
 |
Price from £6.49 up to £7.29
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 100mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø100mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 100mm width and a 6mm more→shaft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø100mm. • Maximum Speed: 4500rpm. • Model No. SFBS100Technica
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
