INGCO AG200018 Industrial
Cutting Discs80
 |
DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 180 mm • Thickness: 1.5 mm • Bore Size: 22.23 mm Features and Benefits • Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in …
 |
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
Reliable Cuts in Concrete - The Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality sta more→ndards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting concrete. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Concrete • Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete • Optimised diamond matrix delivers solid results thanks to the disc's high-quality standards …
 |
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …
 |
Porcelain Series Diamond Blades for cutting ceramic, porcelain, granite, porcelain based paving and marble. Wet cutting is recommended for a longer blade life and dust suppression, but they can also b more→e used dry. The long-lasting, 10mm deep, continuous sintered rim enables fast and clean cuts. All blades have a centre core reinforcement plate that prevents the blade de-tensioning to increase blade life and reduce vibration. Conforms to EN 13236. Features: 10mm continuous sintered rim for fast, clean cuts Centre core reinforcement plate for reduced vibration Centre core reinforcement plate for reduced vibration Wet cutting for a longer blade life and dust suppression Conforms to EN 13236 Specifications: …
 |
The Makita A24 depressed centre grinding disc is perfect for grinding steel and dressing welds. Specifications • Diameter: 180mm • Bore: 22.23mm • Thickness: 6mm • Pack Quantity: 1
 |
Lenox MetalMax is a new alternative to abrasive cut-off discs. Its breakthrough diamond technology delivers extreme durability to help you maximise work efficiencies and reduce costs in your metal cut more→ting jobs. MetalMax blades are recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminium and non-ferrous metals. Designed for use in the same power tools as bonded abrasive discs, at the same RPMs and feed forces, MetalMax blades can be used without having to change any operating settings. Specifications • Diameter: 180mm • Thickness: 1.5mm • Arbor: 22.23mm
 |
A flat metal cutting disc which is ideal for working on steel. Part of a range of Makita reinforced abrasive cutting and grinding discs which are suitable for use with grinders and disc cutters. Speci more→fications • Model No: D-18683 • Diameter: 180mm • Thickness: 2.5mm • Bore: 22.23mm • Quantity: 1 Note generic image is shown for illustration purposes. Please refer to the description for the specifications of the item you will be purchasing Features and Benefits • Flat centre cutting disc • Ideal for cutting steel
Wire & Cup Brushes322
 |
Price from £29.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Wheel Brush 115mm M14 Thread LES472217
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 115mm.Width: 14mm.Bore: M14.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12,500/min.Addi
 |
Price from £18.00
Compare prices4→Compare prices and buy Bosch 0.3mm Inox Crimped Wire Cup Brush 65mm M14 Thread 2608622061
Extra-Fine Finish - The Clean for Inox Wire Cup Brush provides an extra-fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications, the wire cup brush is suitable fo more→r cleaning work such as removing coatings and rust. It is ideal for use on medium to large stainless steel, aluminium and non-ferrous metal surfaces, and is also suitable for roughing, matt sanding, paint stripping and texturing. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, …
 |
Price from £6.95 up to £7.53
Compare prices4→Compare prices and buy Sealey Wire Brush Set 8pc Brassed
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm (x1), ø more→75mm (x1), Removable Shafts (x3).• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. Crimped brassed steel filaments add extra rigidity and cleaning power. Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm(x1), ø75mm (x1), Removable Shafts (x3).• Suitable for use with power tools up to the maximum rated speed (4500rpm). • Shaft: ø6mm. • Contents: Brushes; Flat Wire …
 |
Price from £11.95 up to £17.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush 80 X M14X2 S/S 0,30Mm FAIWBC80S
Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for industrial use a more→nd more specialist applications. Features: For use on s/less steel and heavier duty applications M14 thread mount M14 thread mount Specifications: Dimensions: H:11.5 x W:6.0 x D:9.0 cm Colour: Green Guarantee:5 years Material: Steel Model Number: FAIWBC80S
 |
Price from £15.95
Compare prices3→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 60mm M10 x 1.5 Thread LES421164
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Lessm
 |
Price from £3.49 up to £3.71
Compare prices4→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 26m
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
 |
Price from £8.95 up to £14.99
Compare prices4→Compare prices and buy Faithfull Wire Brush Shaft Mtd 70 X 25Mm 0,30Mm FAIWBSI70
Industrial Wire Cup Brush for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Max. Cutting Speed: 12 more→,500 rpm.Shaft: 6mm (1/4in). Features: 6mm shank For cleaning paint or deburring moulds or castings For cleaning paint or deburring moulds or castings Suitable for hard-to-reach areas Can be used in industrial power tools at higher speeds Specifications: Dimensions: H:12.5 x W:5.0 x D:8.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBSI70
|
Price from £26.95
Compare prices3→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 100mm M14 x 2.0 Thread LES426177
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Diame
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
